System Configuration
| Default Setting: AT | |
Serial Port | Allows you to configure the integrated serial port. The options are: | |
| • | Disabled |
| • | COM1 |
| • | COM2 |
| • | COM3 |
| • | COM4 |
| Default Setting: COM1 | |
SATA Operation | Allows you to configure the internal SATA | |
| • | Disabled |
| • | ATA |
| • | AHCI |
| Default Setting: AHCI | |
|
| NOTE: SATA is configured to support RAID mode. |
USB Controller | Allows you to control the USB controller. The options are: | |
| • | Enable USB Controller |
| • Diasabe USB Mass Storage Dev | |
| • | Disable USB Controller |
| Default Setting: Enable USB Controller | |
SMART Reporting | Allows you to activate the Self Monitoring Analysis and Reporting Technology | |
| (SMART). | |
| Default Setting: Disabled | |
Diskette Drive | Allows you to activate the diskette drives. The options are: | |
| • | Disabled |
| • | Enabled |
| Default Setting: Disabled | |
Miscellaneous Devices | Allows you to enable or disable the following devices: | |
| • | Internal Modem |
| • | Fixed Bay |
| • | eSATA Ports |
| • Hard Drive Free Fall Protection | |
| • | External USB Port |
| • | Microphone |
| • | Camera |
| You can also enable or disable Media Card and 1394 together. | |
| Default Setting: All devices are enabled. | |
Keyboard illumination | Allows you to configure the keyboard illumination feature. The options are: |
103