Dell 5548P, 5524P manual Configuring the Stack, Configuration Using the Setup Wizard

Page 16

Configuring the Stack

The switch is always considered to be a stack of switches even if the stack only contains a single switch. If there is more than one switch in the stack, each switch must be configured individually. See "Unit ID Assignment" for instructions on how to configure the stack.

Configuration Using the Setup Wizard

The Setup Wizard guides you through the initial switch configuration to get the system up and running as quickly as possible. Note that you can skip the Setup Wizard and configure the switch manually through the CLI.

The Setup Wizard configures the following fields:

SNMP Community String and SNMP Management System IP address (optional)

Username and password

Management switch IP address

IP subnet mask

Default gateway IP address

NOTE: The Setup Wizard assumes the following:

The PowerConnect switch was never configured before and is in the same state as when you received it.

The PowerConnect switch booted successfully.

The console connection is established and the console prompt is displayed on the screen of a VT100 terminal switch.

Connect the Master unit to a terminal. You can identify the Master unit by the illuminated Master LED on the front panel of the switch (see Figure 2-2).

To configure the system using the Setup Wizard:

1Obtain the following information from the network administrator:

SNMP Community String and SNMP Management System IP address (optional)

Username and password

16

Configuring the Switch

Image 16
Contents Getting Started Guide JN2W1 Contents Configuring the Switch Overview InstallationSite Preparation Unpacking the Switch Package ContentsUnpacking Installing the Switch Installing in a RackConnecting the Switch to Power Supplies Installing on a Flat SurfaceStacking Switches StackingShows this process Unit ID Assignment Automatic AssignmentManual Assignment 1Show unit stack id 2Set unit stack id 3BackConfiguring the Switch Configuration Work FlowConnecting the Switch to the Terminal Front-Panel Console PortBooting the Switch Initial LEDsConfiguring the Stack Configuration Using the Setup WizardConfiguring the Switch Enter the Snmp Management System IP Configuring the Switch Press Enter Following information is displayed
Related manuals
Manual 9 pages 52.3 Kb

5524, 5548P, 5524P, 5548 specifications

The Dell Networking series includes the switches Dell 5524P, 5548, 5548P, and 5524, designed to cater to a variety of networking needs in enterprise environments. These models are renowned for their robustness, scalability, and ease of deployment, making them suitable for both small and large-scale networks.

The Dell 5524P switch is particularly notable for its Power over Ethernet (PoE) capabilities, supporting up to 24 ports. This feature allows the switch to deliver both data and power over the same cable, simplifying deployments for powered devices like IP cameras, VoIP phones, and wireless access points. With a switching capacity of 48 Gbps, the 5524P ensures efficient data handling, reducing latency and enhancing overall network performance.

On the other hand, the Dell 5548 switch is designed with a focus on scalability and advanced Layer 2 and Layer 3 functionality. It includes 48 Gigabit Ethernet ports and provides a switching capacity of 96 Gbps. The 5548 switch supports stacking technology, which simplifies management and allows multiple switches to act as a single unit. This is ideal for growing networks needing additional capacity without overhauling existing infrastructure.

The Dell 5548P model builds upon the robust features of the 5548 while integrating PoE+ support, which provides up to 30 watts per port. This is optimal for high-power devices and enhances the overall flexibility of network deployments. The switch also incorporates advanced security features, enabling organizations to create secure network segments and enforce access controls.

Lastly, the Dell 5524 switch provides essential features suitable for smaller networks or as part of a larger network infrastructure. It offers 24 ports with a straightforward configuration, making it a cost-effective solution without compromising on performance. Its energy-efficient design is in line with modern environmental standards, reducing power consumption without sacrificing functionality.

In summary, the Dell 5524P, 5548, 5548P, and 5524 switches present a comprehensive range of features, suitable for diverse networking needs. With advanced technologies like PoE, stacking capability, and robust security, they cater to the requirements of busy enterprise environments, helping simplify management and enhance productivity while supporting future growth.