Back to Contents | Dell 580 specs

	The diagnostic lights are not lit
	after the computer successfully
	boots to the operating system.

	A possible processor failure has	• Reseat the processor (see Processor information for your computer).
	occurred.	• If the problem persists, contact Dell.

	Memory modules are detected, but	• If two or more memory modules are installed, remove the modules, then reinstall one module
	a memory failure has occurred.	and restart the computer. If the computer starts normally, continue to install additional
		memory modules (one at a time) until you have identified a faulty module or reinstalled all
		modules without error.
		• If available, install working memory of the same type into your computer.
		• If the problem persists, contact Dell.

	A possible graphics card failure has	• Reseat any installed graphics cards.
	occurred.	• If available, install a working graphics card into your computer.
		• If the problem persists, contact Dell .

	A possible floppy drive or hard	Reseat all power and data cables.
	drive failure has occurred.

	A possible USB failure has occurred.	Reinstall all USB devices and check all cable connections.

	No memory modules are detected.	• If two or more memory modules are installed, remove the modules, then reinstall one module
		and restart the computer. If the computer starts normally, continue to install additional
		memory modules (one at a time) until you have identified a faulty module or reinstalled all
		modules without error.
		• If available, install working memory of the same type into your computer.
		• If the problem persists, contact Dell.

	Memory modules are detected, but	• Ensure that no special requirements for memory module/connector placement exist.
	a memory configuration or	• Ensure that the memory you are using is supported by your computer (see the Specifications
	compatibility error has occurred.	section for your computer).
		• If the problem persists, contact Dell.

	A possible expansion card failure	• Determine if a conflict exists by removing an expansion card (not a graphics card) and
	has occurred.	restarting the computer.
		• If the problem persists, reinstall the card you removed, then remove a different card and
		restart the computer.
		• Repeat this process for each expansion card installed. If the computer starts normally,
		troubleshoot the last card removed from the computer for resource conflicts.
		• If the problem persists, contact Dell.

	Another failure has occurred.	• Ensure that all hard drive and optical drive cables are properly connected to the system
		board .
		• If there is an error message on the screen identifying a problem with a device (such as the
		floppy drive or hard drive), check the device to make sure it is functioning properly.
		• If the operating system is attempting to boot from a device (such as the floppy drive or
		optical drive), check system setup to ensure the boot sequence is correct for the devices
		installed on your computer.
		• If the problem persists, contact Dell.


Back to Contents Page

580 specifications

The Dell WKG9D, identified as part number 580, 0WKG9DA00, and DCMF, is a cutting-edge component from one of the leading names in computing technology. Designed primarily for high-performance laptops and workstations, this component showcases a blend of advanced features and technologies aimed at enhancing productivity and performance.

One of the standout characteristics of the Dell WKG9D is its reliance on the latest advancements in memory and storage technologies. With a robust architecture that supports top-tier processors, it plays a crucial role in ensuring smooth multitasking and seamless performance. The WKG9D is constructed to work efficiently with DDR4 memory, which provides higher bandwidth and improved energy efficiency compared to its predecessors. This is crucial for users who require substantial memory capacity for demanding applications such as graphic design, 3D modeling, or data analysis.

Another important feature of this component is its compatibility with a wide range of Dell devices. This versatility makes it an excellent choice for IT professionals who need a reliable option for upgrading or replacing components in various systems. The design ensures that it fits perfectly into a multitude of laptop models, enhancing the overall flexibility and maintainability of devices.

Furthermore, the Dell WKG9D is engineered with reliability in mind. Quality control measures during the manufacturing process ensure that it can withstand rigorous usage scenarios often found in enterprise environments. This means users can expect durability and long life, significantly reducing the likelihood of hardware failures.

The WKG9D also emphasizes energy efficiency. With an increasing focus on sustainability in technology, this component consumes less power while maintaining high performance, which is critical for mobile devices where battery life is a concern. By optimizing power consumption, it enables users to work longer without needing a recharge.

To summarize, the Dell WKG9D, along with its part numbers like 580, 0WKG9DA00, and DCMF, stands out due to its high-performance capabilities, broad compatibility, emphasis on reliability, and energy-efficient design. Whether used in a corporate setting or for personal productivity, this component is engineered to meet the demands of today's performance-driven environments, making it a solid choice for users looking for enhanced computing power.

Back to Contents Page

580 specifications