Replace the card retention bracket ensuring that:
•The guide clamp is aligned with the guide notch.
•The tops of all cards and filler brackets are flush with the alignment bar.
•The notch in the top of the card or filler bracket fits around the alignment guide.
1 | alignment guide | 2 | filler bracket |
|
|
|
|
|
|
3 | alignment bar | 4 | card retention bracket |
|
|
|
|
|
|
5 | guide clamps (2) | 6 | guide notchs (2) |
|
|
|
|
|
|
|
|
|
|
|
Configuring Your Computer After Removing or Installing a PCI/PCI Express Card
NOTE: For information on location of connectors, see the Setup Guide. For information on installing drivers and software for your card, see the documentation that shipped with the card.
| Installed | Removed | |||
|
|
|
|
|
|
Sound Card | 1. | Enter system setup (see System Setup). | 1. | Enter system setup (see System Setup). | |
| 2. | Go to Integrated Peripherals and select Onboard Audio Controller, and then | 2. | Go to Integrated Peripherals and select Onboard | |
|
| change the setting to Disabled. |
| change the setting to Enabled. | |
| 3. | Connect the external audio devices to the sound card's connectors. | 3. | Connect the external audio devices to the compute | |
|
|
|
|
|
|
Network | 1. | Enter system setup (see System Setup). | 1. | Enter system setup (see System Setup). | |
Card | 2. | Go to Integrated Peripherals and select Onboard LAN Controller, and then | 2. | Go to Integrated Peripherals and select Onboard | |
|
| change the setting to Disabled. |
| change the setting to Enabled. | |
| 3. | Connect the network cable to the network card's connector. | 3. | Connect the network cable to the integrated netw | |
|
|
|
|
|
|
|
|
|
|
|
|