Video |
|
|
Primary | This field determines which video controller will become the primary video controller when 2 controllers are available in the system. This selection | |
Video | matters only if there are 2 video controller present. | |
|
| Auto(default) - Use the |
|
| Onboard/Card - Use the integrated video controller unless a Graphic care is installed. A PCI Express Graphic(PEG) card will overide and disable |
|
| the integrated video controller. |
Performance |
| |
Multi Core |
| This field specifies whether the processor will have one or all cores enable. The performance of some application will improve with the additional |
Support |
| cores. |
Hyper- |
| This option enables or disables the |
Threading |
| This option is enabled by default. |
Technology |
|
|
Intel® |
| This option enables or disables the Intel® Turbo Boost Technology. When disabled, Intel® Turbo Boost Technology allows processor(s) to run at |
Turbo Boost |
| frequencies higher than the advertised frequency |
Technology |
| This option is enabled by default. |
|
| |
Intel® |
| This Option enables or disables the Intel® SpeedStep™ mode of the processor. When disabled, the system is placed into the highest performance |
SpeedStep™ | state and the Intel® SpeedStep™ applet or native operating system driver are prevented from adjusting the processor's performance. When enable. | |
|
| the Intel® SpeedStep™, enabled CPU is allowed to operate in multiple performance states. |
|
| This option is disabled by default. |
C States |
| This option enables or disables additional processor sleep states. The operating system may optionally use these for additional power saving when |
| idle. | |
Control |
| This option is disabled by default. |
|
| |
Limit CPUID |
| This field limits the maximum value the processor Standard CPUID Function will support. Some operating systems will not complete installation when |
Value |
| the maximum CPUID Function supported is greater than 3. |
|
| This option is disabled by default. |
Virtualization Support | ||
|
| This Option specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel® Virtualization |
Virtualization | Technology. | |
|
| Enable Intel® Virtualization Technology - This option is disabled by default. |
VT for Direct | Enables or disables the Virtual Machine Monitor (VMM) from utilizing the additional hardware capabilities provided by Intel® Virtualization technology | |
I/O |
| for direct I/O. |
|
| Enable Intel® Virtualization Technology for Direct I/O - This option is disabled by default. |
Trusted |
| Field specifies whether a Measured Virtual Machine(MVMM) can utilize the additional hardware capabilities provided by Intel® Trusted Execution |
| Technology. The TPM Virtualization Technology and Virtualization Technology for Direct I/O must be enable to use this feature. | |
Execution |
| Enable Intel® Trusted Execution Technology - This option is disabled by default. |
|
| |
Security |
|
|
Administrative | Provides restricted access to the computer's system setup program in the same way that access to the system can be restricted with the System | |
Password |
| Password option. |
|
| This option is not set by default. |
System |
| Displays the current status of the system's password security feature and allows a new system password to be assigned and verified. |
Password |
| This option is not set by default. |
|
| |
Password |
| Enables or disables the user from changing the system password without the administrative password. |
Changes |
| This option is enabled by default. |
|
| |
Admin Setup | Enables or disables the user from entering Setup when an Admin password is set. | |
Lockout |
| This option is disabled by default. |
|
| |
Password |
| These fields control the minimum and maximum number of characters allowed for Admin and System passwords. Changes to these fields are not |
Configuration | active until they are committed via the apply button or saving changes before exiting setup. | |
|
| Admin Password Min |
|
| Admin Password Max |
|
| System Password Min |
|
| System Password Max |
Strong |
| This field enforces strong passwords. If enabled, all passwords must contain at least one uppercase character, one lowercase character, and be at |
Password |
| least 8 characters long. Enabling this feature automatically changes the default minimum password length to 8 characters. |
|
| Enforce strong password - This option is disabled by default. |
TPM Security | Enables or disables the trusted platform module (TPM) security. | |
|
| You can set the TPM security to: |