Dell 9010 manual Memory configurations

DELL™ OPTIPLEX™ 9010 TECHNICAL GUIDEBOOK VER 1.2

MEMORY

NOTE: Memory modules should be installed in pairs of matched memory size, speed, and technology. If the memory modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance. The entire memory range is available to 64-bit operating systems.

		MT	DT	SFF	USFF
Type: DDR3 Synch DRAM Non-ECC Memory			1600MHz2
DIMM Slots		4	4	4	2
DIMM Capacities		Up to 8GB	Up to 8GB	Up to 8GB	Up to 8GB
Minimum Memory		2GB	2GB	2GB	2GB
Maximum System Memory		32GB1	32GB1	32GB1	16GB1
Memory configurations
32GB1 DDR3, 1600MHz2, (4 x 8GB)		X	X	X
16GB1 DDR3, 1600MHz2, (4 x 4GB)		X	X	X
16GB1 DDR3, 1600MHz2, (2 x 8 GB)					X
8GB1	DDR3, 1600 MHz2, (2 x 4GB)	X	X	X	X
6GB1	DDR3, 1600MHz2, ( 2GB + 4GB)	X	X	X	X
4GB1	DDR3, 1600MHz2, (2 x 2GB)	X	X	X	X
4GB1	DDR3, 1600MHz2, (1 DIMM)	X	X	X	X
2GB DDR3, 1600MHz2, (1 DIMM)		X	X	X	X

1To fully utilize 4GB or more of memory requires a 64-bit enabled processor and 64-bit operating system. With 32-bit OS, the total amount of available memory will be less than 4GB. The amount less depends on the actual system configuration.

21600MHz memory will only perform as 1600MHz memory when 3rd generation CPUs are used. It will perform as 1333MHz memory if 2nd generation i3 2130, i3 2125, i3 2120, G860, G850 CPUs are installed in the system. It will perform as 1066MHz memory if 2nd generation G640, G630 CPUs are installed in the system.

13