Congratulations on Your Purchase

10-Outlet Surge Protector

B1006T

Thank you for selecting the CyberPower B1006T Surge Protector. The information contained in this brochure explains the features and operation of the B1006T. Please take a few moments to read this manual.

FEATURES

1.ON/OFF Reset Control Switch and Circuit Breaker

Controls power to all outlets. The switch is also a 15A breaker. When an overload occurs, it will automatically switch off. To resume operation, ensure the overload condition is removed and reset the surge protector by switching the unit ON.

2.Grounded LED Indicator

Illuminated when a properly grounded AC outlet is detected.

3.Surge Protected Indicator

Illuminated when the surge protection feature is working properly.

4.Safety Covers

All outlets on this surge protector include safety covers. To ensure the safety of children and to avoid electric shock and damage from a high-dust environment, slide the plastic outlet cover over outlets that are not used.

5.Four Wide-Spaced Outlets

Easily plug in large chargers without interfering with the other outlets.

6.Protecting Phones/Fax/Modems

To protect your equipment from surge along phones/fax/ modems lines.

A.Connect the phone line from wall outlet into the “In” port.

B.Connect the phones/fax/modems line(s) in the “Out” ports.

SPECIFICATIONS

•Model Number: B1006T

•Outlets: 10 – 4 Transformer Spaced

•Surge Protection: 2850 Joules

•Communication Protection: RJ11 1-In / 2-Out

•Electrical Rating: 125V/15A/1875W

•Maximum Peak Current: 135,000A

•UL Clamping Voltage: UL 1449 3rd/330V (L-N), 400V (L-G, N-G)

•EMI/RFI Filtration: 150 kHz to 100 MHz

CAUTION

TO REDUCE RISK ELECTRIC SHOCK - Use only in dry locations and only indoors. DO NOT plug into another relocat- able power tap. DO NOT “daisy chain” surge protectors. DO NOT use with any aquarium equipment. DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel. This device features an internal protection that will disconnect the surge protective component at the end of its useful life, but will maintain power to the load – now unprotected.

TROUBLESHOOTING

If the ON/OFF is switched off, the 15 AMP circuit breaker may have tripped. Examine your connected equipment and remove the device that is overloading the circuit. Then, the ON/OFF switch back to RESET.

If the Grounded indicator does not light when you plug in the surge protector, move the surge protector to a different grounded three-prong AC outlet. If it still does not light, return the product to the dealer for assistance. If the surge protector proves to be working properly, your outlets may not be properly grounded and need to be repaired by a professional electrician.

If the Grounded indicator turns off after a period of use, the surge protection has been depleted. Replace your

surge protector.

If the Protected indicator does not light, the surge protector’s AC line is no longer protected from surges. Replace the surge protector. The surge protector may have received a power surge or spike beyond its specified limits that might overload the protection circuitry and make it inactive. The surge protector absorbed enough of the surge to protect your connected equipment, but it will not protect against future surges and spikes.

TECHNICAL SUPPORT

Please contact our Tech Support department with installation, troubleshooting, or general product questions.

•Phone: 1-877-297-6937

•Email: tech@cpsww.com

•Hours of Operation: Monday – Friday, 8:00am – 5:00pm CST

User Manual