Sennheiser HME 26-100-7, HME 26-100(4), HME 26-600(4), HME 26-600-7 manual Technical Data, Hmdc

Headphones frequency response Mikrophone polar diagram

	+15
d	+10										30°
B	+5
r	0										60°
	-5
	-10
	-15
	20	50	100	200	500	1K	2K	5K	10K	20K	90°
			Passive				Active		Hz

Microphone frequency response
+15									120°
+10
+5									150°
0
-5									low frequencies
-10
-15									125 Hz
-20									250 Hz
-25
									500 Hz
40 50	100	200	500	1K	2K	5K	10K	20K
		Farfield			Nearfield				1 kHz

0°

030°

10

20

3060°

dB 90°

120°

150°

180°

high frequencies

2 kHz

4 kHz

8 kHz

16 kHz

Technical Data

		HMDC 26
Headphone		HMDC 26-600
Transducer principle		dynamic, closed
Ear coupling		supra-aural
Frequency response		20 – 18,000 Hz
Impedance		600 O mono / 1,200 O stereo
Sensitivity		108 dB SPL at 1 kHz, 1 mW
		110 dB SPL at 1 kHz, 1 V
Maximal SPL		120 dB SPL at 1kHz
Active attenuation		 18 dB (100 – 300 Hz)
Attenuation (active + passive)		15 – 30 dB
Distortion		< 0.5 % at 1 kHz
Contact pressure		approx. 3.6 N
Microphone
Type		BMD 424
Transducer principle		dynamic, hyper-cardioid characteristic
Frequency response		40 – 16,000 Hz
Freefield sensitivity, no load		0,4 mV / Pa at 1 kHz
Impedance		300 O
General data
Ambient temperature		Operation: -15 °C to +55 °C
		Storage: -55 °C to +70 °C
Weight without cable		approx. 210 g
Power supply for NoiseGard™		2 x 1.5 V AA alkaline battery (IEC LR 6) or
(depending on type of cable)		2 x 1.2 V AA rechargeable battery (IEC LR 6) operating time with batteries approx. 60 h
Packaging
Individual package dimensions		194 mm x 84 mm x 249 mm
Master carton dimensions		512 mm x 252 mm x 382 mm
Units per master carton		12
Languages		German, English, French, Italian, Spanish, Dutch, Russian
Product versions
Model	Item no. Description	Cable, length 2 m	Model	Item no. Description	Cable, length 2 m

trademarks of Sennheiser electronic GmbH & Co. KG. www.sennheiser.com

HME 26-100 (4)	504203	100 O per system, condenser	–
		microphone cardioid
HME 26-600 (4)	504204	600 O per system, condenser	–
		microphone cardioid
HME 26-100	502454	100 O per system, condenser	–
		microphone omni-directional
HME 26-100-7	502455	100 O per system, condenser	steel wire
		microphone omni-directional	cable with
			open ends
HME 26-600	502467	600 O per system, condenser	–
		microphone omni-directional
HME 26-600-7	502468	600 O per system, condenser	steel wire
		microphone omni-directional	cable with
			open ends
HME 26-600 S	502469	600 O, one side, condenser	–
		microphone omni-directional

HMD 26-100	502451	100 O per system,	–
		dynamic microphone cardioid
HMD 26-100-7	502452	100 O per system,	steel wire cable
		dynamic microphone cardioid	with open ends
HMD 26-600	502463 600 O per system,		–
		dynamic microphone cardioid
HMD 26-600-7	502464	600 O per system,	steel wire cable
		dynamic microphone cardioid	with open ends
HMD 26-600 S	502465	600 O, one side,	–
		dynamic microphone cardioid
HMD	502466	600 O per system,	steel wire cable
26-600-X3K1		dynamic microphone cardioid	with XLR-3
			connector and
			6.3 mm jack plug
HMDC 26-600	502453	NoiseGard™, 600 O per system,	–
		dynamic microphone cardioid

538364  03/10  Sennheiser and NoiseGard™ are registered