Black Box In-Line Surge Protector, PoE, Mode B (RJ-45 8-Wire) specifications Specifications

FebruarySP077A2010

MT1000A-85-R4

In-Line Surge Protector, PoE, Mode B (RJ-45 8-Wire)

Get convenient in-line surge protection for access points on your wireless Ethernet network.

Put avalanche diode and thyristor protection where you need it.

Specifications

Application: PoE (Mode B)

Ground Wire: Yes

Maximum Shunt Capacitance: <25 pF (Ethernet lines only)

Peak Pulse Current: Pins 1, 2, 3, and 6: 132 amps; Pins 4, 5, 7, and 8: 103 amps

Pins Protected: All

Protection Type: Avalanche diode and thyristor technology

Response Time: <5 ns

Standard Clamping Voltage: Pins 1, 2, 3, and 6: 7.5 volts; Pins 4, 5, 7, and 8: 30 volts

Connectors: (2) RJ-45 F

Overview

This in-line surge protector protects data lines against both line-to-line and ground-to-line surges. It also protects wireless access points that are typically installed in remote locations, which is important because the remote access points may expose devices to severe transients and surges.

What’s included

•In-Line Surge Protector

•6" RJ-45 patch cable

•This specification sheet

For installation instructions, turn this page over…

Customer

Support

Information

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: info@blackbox.com