Graco Inc 239124, 239136, 239129, 750, 239130, 239122, 239091, 239131, 239092, 239132 Toxic Fluid Hazard

Page 3

WARNING

TOXIC FLUID HAZARD

Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or swallowed.

DKnow the specific hazards of the fluid you are using.

DStore hazardous fluid in an approved container. Dispose of hazardous fluid according to all local, state and national guidelines.

DAlways wear protective eyewear, gloves, clothing and respirator as recommended by the fluid and solvent manufacturer.

DPipe and dispose of the exhaust air safely, away from people, animals, and food handling areas. If the diaphragm fails, the fluid is exhausted along with the air.

DNever use an acetal pump to pump acids. Take precautions to avoid acid or acid fumes from contacting the pump housing exterior. Stainless steel parts will be damaged by exposure to acid spills and fumes.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

DCharge the surge suppressor with compressed air or nitrogen only. Do not use oxygen. Such use could result in an explosion.

DNever pump flammable fluids with polypropylene units.

DGround the equipment. Refer to Grounding on pages 4 and 5.

DNever use a polypropylene pump or surge suppressor with non-conductive flammable fluids as specified by your local fire protection code. Refer to Grounding on pages 4 and 5 for additional information. Consult your fluid supplier to determine the conductivity or resistivity of your fluid.

DIf there is any static sparking or you feel an electric shock while using this equipment, stop pump- ing immediately. Do not use the equipment until you identify and correct the problem.

DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being pumped.

DPipe and dispose of the exhaust air safely, away from all sources of ignition.

DKeep the work area free of debris, including solvent, rags, and gasoline.

DElectrically disconnect all equipment in the work area.

DExtinguish all open flames or pilot lights in the work area.

DDo not smoke in the work area.

DDo not turn on or off any light switch in the work area while operating or if fumes are present.

DDo not operate a gasoline engine in the work area.

308703 3

Image 3
Contents Instructions-Parts List Important Safety InstructionsModel 239088 Model Model 239096 Model Symbols Table of ContentsToxic Fluid Hazard Grounding InstallationGrounding a Surge Suppressor Connecting Automatic Models Connecting Manual ModelsMounting Automatic and Manual Models Use oxygen Pressure Relief ProcedureMinimum and Maximum Operating Temperatures OperationAutomatic Models Manual Models Charging and StartupTroubleshooting See Charging and StartupSee Bladder Failure, Relieve the pressure ServiceBladder Failure Replacing Bladder or BellowsTorque Table Automatic Husky 750, 3/4-in Surge Suppressors Model NumbersNo. Part No Description Parts MatrixModel Parts Drawings24, 25, 27 Manual Husky Automatic Husky DimensionsWeight Models 239091, 239096 Technical DataGraco Information Graco Standard Warranty