NETGEAR XWNB5602 manual

Page 20

Check the electrical current for any device plugged into the filtered AC socket. Do not exceed home and product outlet ratings and electrical requirements.

The socket-outlet shall be installed near the equipment and be easily accessible.

Only power cords are allowed to be inserted into the filtered AC socket; no other equipment with a direct plug-in is allowed. Power cords needs to be a maximum of 1 m long and a minimum of 0.75 mm2 of cross-sectional area.

Do not plug devices into the XAV5401 filtered AC outlet that exceed the product ratings. The output voltage of the filtered AC outlet is the same as the power outlet that the XAV5401 is plugged into. To help avoid damaging your system, be sure that the attached devices are electrically rated to operate with the power available in your location.

If the input AC voltage is less than 100 Vac, the device plugged into the filtered AC socket of the XAV5401 might not perform as well as expected.

DO NOT PLUG MAJOR HOME APPLIANCES into the filtered AC socket or into an attached power strip. The device is not intended to be used with home appliances such as air conditioners, power tools, space heaters, fans, hair dryers, ovens, or refrigerators.

20

Image 20
Contents Powerline 500 WiFi Access Point XWNB5602 Installation Guide Contents Package Contents Hardware Features LED Descriptions Button Descriptions Set Up Your Powerline Network  To install the adapters and set up securityPage Room a Room B Set Up WiFi Access on Your XWN5001  To set up WiFi access using Netgear geniePowerline icon XWN5001 icon Page Page  To set up WiFi access using the browser setup guide Wireless network name Ssid Network key Passphrase Connect to the XWN5001 Access Point  To manually connect to the XWN5001 access pointInstall Netgear genie  To download and install Netgear genie on your computerCompatible Netgear Powerline Devices Safety InformationPage Page Page Page Support