Connecting the Router to your Computer

1.First, connect the power adapter to the power input at the back panel of the DSL-G604T and then plug the other end of the power adapter to a wall outlet or power strip. On the front of the device, the Power LED will turn ON to indicate proper operation.

2.Insert one end of the Ethernet cable into an Ethernet port on the back panel of the DSL-G604T and the other end of the cable to an Ethernet Adapter or available Ethernet port on your computer.

3.Insert the telephone cable included with the Router into the ADSL port, and then connect the cable to your telephone line. (Line must be activated for ADSL use)

4.Check the LED display on the front of the Router to confirm that the connections have been made. (This will be shown with solid lights for the corresponding port)

Antenna

Post

Connect

antenna here

Ethernet Ports

Connect to

Ethernet cable

ADSL Port Connect to your ADSL phone line

Power Input

Connect to

power adapter