D-Link DSL-510 manual Home＞WAN＞PPPoE/PPPoA

Page 52

DSL-510 ADSL Router User’s Guide

Home＞WAN＞PPPoE/PPPoA

Choose PPPoE/PPPoA if you’re ISP uses PPPoE/PPPoA connection. Your ISP will provide you with a username, password, VPI, VCI and select connection type. This option is typically used for DSL service.

User Name: Your PPPoE/PPPoA user name provided by your ISP

Password: Your PPPoE/PPPoA password provided by your ISP

Service Name: Enter the service name provided by your ISP. (optional)

VPI: If instructed to change this, type in the VPI value for the initial connection.

VCI: If instructed to change this, type in the VCI value for the initial connection.

Connection Type: Change connection method and packet encapsulation technique as instructed by your ISP. The available connection types are PPPoE LLC, PPPoE VC-Mux, PPPoA LLC, PPPoA VC-Mux, form the pull-down menu. Default Connection Type = PPPoE LLC.

Virtual Circuit: Selection Enable or Disable.

MTU: Maximum Transmission Unit indicates the network stack of any packet is larger than this value will be fragmented before the transmission. During the PPP negotiation, the peer of the PPP connection will indicates it’s MRU and will be accepted. The actual MTU of the PPP connection will indicates its MRU and will be accepted. The actual MTU of the PPP connection will be set to the smaller one of MTU and the peer's MRU. The default is value 1492

MRU: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the PPP information field this device can be received. The default value is 1492 and is used in the beginning of the PPP negotiation. In the normal negotiation, the peer will accept this MRU and will not send packet with information field larger than this value.

MSS: Maximum Segment Size is the largest size of data that TCP will send in a single IP packet. When a connection is established between a LAN client and a host in the WAN connection handshake. The default value is 1432.

Authentication: The available selection types are CHAP, PAP, Auto. Default Type = Auto.

Auto-Reconnect:If enabled, the Router will automatically connect to your ISP after your system is restarted or if the connection is dropped.

ATM

Service Category: UBR and CBR are supported form the ATM.

Bandwidth: Bandwidth setting takes effect only when the CBR is selected. The maximum available bandwidth is from the upstream data rate of ADSL status page.

43

Page 51 Page 53
Image 52
Page 51 Page 53
Contents DSL-510 Adsl Router User’s Guide FCC Warning AttenzioneTable of Contents Web-based Configuration TCP Adsl About This User’s Guide Guide OverviewInstallation Overview RequirementsLow Pass Filters Operating SystemRouter vs. Bridge Mode Account Information User Name and PasswordAdditional PVC Settings Ethernet Port NIC AdapterUnpacking Product Features What is ADSL?Router Description and Operation Front Panel Rear PanelConnect the Adsl Line Computer to Router ConnectionConnect Ethernet LAN to Router DSL-510Hub or Switch to Router Connection Power On RouterWan Configuration Summary Configuring IP Settings on Your ComputerWindows XP for Dhcp DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Windows 2000 for Dhcp Double-click the Network and Dial-up Connections iconDSL-510 Adsl Router User’s Guide General tab will again appear. Click OK button Windows ME for Dhcp DSL-510 Adsl Router User’s Guide Network window again appears, click OK button Windows 98SE for Dhcp DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Access the Web Configuration Manager Using the Configuration Wizard DSL-510 Adsl Router User’s Guide Dynamic IP Address Static IP AddressBridge Mode PPPoE/PPPoADSL-510 Adsl Router User’s Guide Configuring IP When Setting Your Computer Windows XP IP Settings for Bridge ModeDSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Windows 2000 IP Setting for Bridge Mode DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Windows ME IP Setting for Bridge Mode DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Windows 98SE IP Setting for Bridge Mode DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide DSL-510 Adsl Router User’s Guide Home WizardWAN ATMHome＞WAN＞Static IP Address Home＞WAN＞PPPoE/PPPoA DSL-510 Adsl Router User’s Guide Home＞WAN＞Bridge Mode LAN Dhcp Dhcp RelayDNS Advanced Virtual ServerFilters Advanced＞Filters＞OutboundAdvanced＞Filters＞Inbound Schedule Routing DMZ Firewall Firewall violationsAdvanced＞RIP＞Basic Configuration RIPAdvanced＞RIP＞Advanced Configuration Advanced＞PPP＞PPP Configuration PPPAdvanced＞PPP＞PPP Account Configuration AdslSnmp Tools AdminTime System FirmwareDSL-510 Adsl Router User’s Guide Choice the file FIRMWARE.DLF Click Apply button Misc ConnectionsDiagnostic Device Info StatusLog Traffic ATM TCP Adsl Power Adapter Operating TemperatureStorage Temperature DimensionsIn-Line Filter Installation In-Line FiltersSplit Line Filter Installation Line Splitter
Top Page Image Contents