Using the Configuration Utility (continued)
Home > Mode > Central Static IP Router
Select Central Static IP Router mode if the
WAN - Ethernet IP Address-
Subnet Mask-
ISP Gateway Address-
D N S S e r v e r Address-
NAPT-
LAN - Wireless
Enter the IP Address assigned by your ISP
All devices in the network must have the same Subnet Mask
Your ISP will provide this information
Your ISP will provide this information
Select Disable or Enable. NAPT is a form of NAT; it provides a type of firewall by hiding internal IP Addresses and it works as an inbound virtual server, with IP based access control
IP Address- | Enter the IP Address assigned by your ISP |
|
Subnet Mask- | All devices in the network must have the same Subnet Mask | |
Apply- | Click Apply if you have made any changes | 15 |
|
|