D-Link DSL 2740B manual DSL-2740B

Page 1

Thisproduct can besetupusing anycurrentwebbrowser, i.e., Internet Explorer6orNetscape Navigator6.2.3.

DSL-2740B

ADDSL Modem Router

Before You Begin

1.If you purchased this Router to share your high-speed Internet connection with other computers, you must have an established Internet account from an Internet Service Provider (ISP).

2.It is best to use the same computer that is connected to your ISP for configuring the DSL-2740B ADSL Modem Router. The DSL-2740B acts as a DHCP server and will assign all the necessary IP address information on your network. See the Appendix for setting each network adapter to automatically obtain an IP address.

Check Your Package Contents

DSL-2740B 802.11n (draft) Wireless

ADSL2/2+ Modem Router

CD-ROM with Click’n Connect Utility and

Product Documentation

3 Wireless Antennas

Telephone Cable (RJ-11)

CAT 5 UTP Ethernet Cable (RJ-45)

12V 1.2A Power Adapter

Using a power adapter with a different voltage rating will damage and void the warranty for this product.

If any of the above items are missing, please contact your reseller.

©2007 D-Link Australia Pty Ltd. All rights reserved. Trademarks or registered trademarks are the property of their

respective holders. Software and specifications subject to change without notice.

DSL-2740B A DSL Modem Router.

Image 1
Contents DSL-2740B Connecting the Router to your Computer Page Power Up the Device Connect the Device to your Computer Connect the Device to the Adsl Line Detecting Internet Connection Type ISP Configuration Configuring the Router via Link Click’n Connect UtilityEnter your ISP Username Enter your ISP Password Account ConfigurationSet Wireless Connection Completing Setup Configuring the Router via Link Click’n Connect UtilitySetup Complete Appendix Configuring IP SettingsClick OK Technical Support