D-Link DSL-504 manual LED Indicators

Page 12

DSL-504 ADSL Router User’s Guide

LED Indicators

LED Indicators

The LED Indicators read as follows:

Power Solid steady green light indicates the unit is powered on.

Status Light will be dark during power on self test, blink green during the ADSL negotiation phase, and light solid steady green during normal operation. If it blinks green after the ADSL negotiation, a failure of either the ADSL port or an Ethernet port has occurred.

ADSL: Link Steady green light indicates a valid ADSL connection.

ADSL: Act Blinking green light indicates an active WAN session.

Link/Act: Steady green light indicates a valid Ethernet connection, blinking green light indicates an active Ethernet session. One LED per port.

10/100M Steady green light indicates a 100 Mbps connection, a 10 Mbps connection will remain unlit. One LED per port.

6

Image 12

Contents DSL-504 Adsl Router User’s Guide Table of Contents DSL-504 Firmware Upgrade Utility Adsl Service About This User’s GuideBefore You Start Operating SystemsDefault Gateway IP Address VPI VCI MAC AddressGlobal IP Address Page Introduction Router Description and OperationAdsl Technology Product Features Default Routing ATM Asynchronous Transfer Mode Easy Installation Static RoutingStandards Compatability and Compliance Unpacking Front PanelRear Panel Front PanelLED Indicators LED IndicatorsHardware Installation Connect the PowerConnect Adsl Line Connect Ethernet LAN to Router LAN to Router ConnectionWeb-based Router Configuration Setting up the PCIntroduction Getting StartedClick Properties Login Button ManagementPPPoE Configuration PPPoE Configuration Window PVCDhcp Configuration Window End IP AddressNAT Configuration NAT Configuration WindowHow NAT Works Setting Local IP Addresses Port RedirectionPort Redirection Window Redirect Port WindowAdvanced Filter/Firewall Advanced Filtering and Firewall Screen #1 Advanced Filtering and Firewall Screen #2 Advanced Filtering and Firewall Screen #3 Connection Type Connection Type PPPoE/ PPPoA/ RFC 1483 WindowStatic IP Address Configuration Static IP Address Configuration WindowLine Condition Line ConditionUser Name and Password User Name and Password WindowSave Changes Save Changes WindowRestart System Restart System Window Update Firmware Update Firmware WindowSummary Finding the Password Saving ChangesContacting Technical Support Offices Japan Link Japan Technical Specifications GeneralPhysical and Environmental CE Class B FCC Class BIP Concepts IP AddressesIP Network Classes Subnet Mask Class Beginning Ending AddressDSL-504 Firmware Upgrade Utility DSL-504 Adsl Router User’s Guide DSL-504 Adsl Router User’s Guide Limited Warranty Wichtige SicherheitshinweiseHardware Warranty Period Link Offices for Registration and Warranty ServiceSoftware Limitation of Liability FCC WarningPage Registration Card