Asante Technologies AWRT-300N user manual

Page 33

Basic Rate: The Basic Rate setting is not one, but a series of rates at which the Router can transmit. (The Basic Rate is not the actual rate of data transmission. If you want to specify the Router’s rate of data transmission, configure the Transmission Rate setting.)

Transmission Rate: The rate of data transmission should be set depending on the speed of your wireless network.

CTS Protection Mode: CTS (Clear-To-Send) Protection Mode should remain disabled unless you are having severe problems with your wireless products not being able to transmit to the Router in an environment with heavy latency wireless traffic. This function boosts the Router’s ability to catch all wireless transmissions but will severely decrease performance.

Beacon Interval: A beacon is a packet broadcast by the Router to synchronize the wireless network.

DTIM Interval: This value, between 3 and 255, indicates the interval of the Delivery Traffic Indication Message (DTIM). A DTIM field is a countdown field informing clients of the next window for listening to broadcast and multicast messages. When the Router has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. Its clients hear the beacons and awaken to receive the broadcast and multicast messages. The default value is 1.

Fragmentation Threshold: This value specifies the maximum size for a packet before data is fragmented into multiple packets. If you experience a high packet error rate, you may slightly increase the Fragmentation Threshold. Setting the Fragmentation Threshold too low may result in poor network performance. Only minor reduction of the default value is recommended. In most cases, it should remain at its default value of 2346.

RTS Threshold: Should you encounter inconsistent data flow, only minor reduction of the default value, 2347, is recommended. If a network packet is smaller than the preset RTS threshold size, the RTS/CTS mechanism will not be enabled. The Router sends Request to Send (RTS) frames to a particular receiving station and negotiates the sending of a data frame. After receiving an RTS, the wireless station responds with a Clear to Send (CTS) frame to acknowledge the right to begin transmission. The RTS Threshold value should remain at its default value of 2347.

Click Save Settings to save the settings.

33

Image 33
Contents SmartHub Table of Contents Introduction Package ContentsFeatures Connecting the Router Configuring the Router Cable Modem Page DSL Example username@sbcglobal.net Verifying ConnectionPage Connecting to the Router Wirelessly Ssid defaultWEP disabled Setup Setup Basic Setup Web Configuration UtilityInternet Setup Automatic Configuration DhcpPPPoE Pptp Static IPTelstra Cable L2TPNetwork Setup Dhcp Server SettingRouter IP Time Settings Click Save SettingsSetup Ddns Click the Clone My PC’s MAC button Setup MAC Address CloneSetup Advanced Routing Wireless Wireless Basic Wireless SettingsWireless Configuration Manual Page WEP Wireless Wireless SecuritySelect WPA Personal from the Security Mode Encryption Choose 64 bits or 128 bitsWPA Personal WPA2 Personal Select WPA2 Personal from the Security ModeWPA Enterprise Select WPA Enterprise from the Security ModeWPA2 Enterprise Select WPA2 Enterprise from the Security ModeRadius Connecting to the Router with WPS Push Button Optional Wireless Configuration WiFi-Protected SetupWireless MAC Filter Wireless Advanced Wireless Settings Page Security Firewall SecurityAccess Restrictions Internet Access Policy Access RestrictionsApplied PCs Access Restriction & ScheduleBlocked Applications Website BlockingClick Save Settings to save the settings Applications & Gaming Applications & Gaming Single Port ForwardingApplication Name Select or enter an Application Name Application Name Enter an Application Name Applications & Gaming Port Range ForwardingApplications & Gaming DMZ Applications & Gaming QoS Internet Access Priority WirelessApplications CategoryAdd a New Application Online Games MAC Address Ethernet Port Summary Voice DeviceAdministration Management AdministrationAdministration Log Administration Diagnostics Administration Factory Defaults Administration Firmware Upgrade Status Router StatusStatus Local Network Status Wireless Network Specifications App Appendix Information Federal Communication Commission Interference StatementFCC Radiation Exposure Statement Europe EU Declaration of Conformity IC Radiation Exposure StatementEN60950-1 EN50385EN 301 489-17 V1.2.1 EN 301 489-1 V1.6.1Mailsupport@asante.com Technical Support