NETGEAR WN802T manual Setting Up and Testing Basic Wireless Connectivity

Page 30

RangeMax NEXT Wireless Access Point WN802T Reference Manual

– 11b/g/Next – 802.11b, 802.11g and 802.11n wireless stations can be used. The default is 11b/g/Next

•Channel/Frequency. From the pull-down menu, select the channel you wish to use on your wireless LAN. The wireless channels to use in the U.S. and Canada are 1 to 11; for Europe and Australia, 1 to 13. The default is channel 6.

It should not be necessary to change the wireless channel unless you experience interference (shown by lost connections and/or slow data transfers). Should this happen, you may want to experiment with different channels to see which is the best. See the article on “Wireless Channels” available on the NETGEAR website. (A link to this article and other articles of interest can be found in Appendix B, “Related Documents.”) When selecting or changing channels, some points to bear in mind:

4.Click Apply to save your wireless settings.

Setting Up and Testing Basic Wireless Connectivity

Follow the instructions below to set up and test basic wireless connectivity. Once you have established basic wireless connectivity, you can enable security settings appropriate to your needs.

1.From a web browser, log in to the WN802T using its default address of http://192.168.0.233. Use the default user name of admin and default password of password— or use a new LAN address and password if you have set them up.

2.From the main menu under Setup, select Basic Settings. Verify that the correct Country/ Region in which the wireless interface will operate has been selected.

3.Click Apply to save any changes.

4.From the main menu under Setup, verify your Operating Mode—either 11b/g/Next or 11b/g. Verify that the correct (default) channel has been selected for your network.

It should not be necessary to change the wireless channel unless you notice interference problems or are near another wireless access point. Select a channel that is not being used by any other wireless networks within several hundred feet of your wireless access point.

5.Click Apply to save any changes.

6.Configure and test your PCs for wireless connectivity

2-12

Installation and Configuration

v1.0, June 2006

Page 29 Page 31
Image 30
Page 29 Page 31
Contents NETGEAR, Inc Trademarks Iii FCC Requirements for Operation in the United States Certificate of the Manufacturer/Importer V1.0, June Contents Chapter Management About This Manual Conventions, Formats and ScopeHow to Use This Manual How to Print this ManualPrinting a Chapter Xii About the RangeMax Next Wireless Access Point Key FeaturesChapter Introduction System Requirements What’s in the BoxFront Panel of the RangeMax Next Back Panel of the RangeMax Next Status Light DescriptionsRangeMax Next Default Settings Location +ÝjÁRangeMax Next Wireless Access Point WN802T Reference Manual Chapter Installation and Configuration Wireless Equipment Placement and Range GuidelinesInstalling the RangeMax Next System RequirementsSetting up the RangeMax Next Configuring Basic LAN and Wireless AccessRangeMax Next Wireless Access Point WN802T Reference Manual RangeMax Next Wireless Access Point WN802T Reference Manual RangeMax Next Wireless Access Point WN802T Reference Manual Verifying Wireless Connectivity Deploying the RangeMax NextConfiguring LAN IP and Wireless Settings Logging in to the RangeMax NextSetting LAN IP Options Configuring Wireless Settings Netgear Setting Up and Testing Basic Wireless Connectivity RangeMax Next Wireless Access Point WN802T Reference Manual RangeMax Next Wireless Access Point WN802T Reference Manual Chapter Wireless Security Settings Understanding WN802T Wireless Security OptionsWEP/WPA Settings Network Authentication TypesTkip Ssid and WEP/WPA Settings Setup Form WEP, WPA-PSK, WPA2-PSK, WPA-PSK + WPA2-PSKConfiguring WEP RangeMax Next Wireless Access Point WN802T Reference Manual Configuring WPA-PSK, WPA2-PSK and WPA-PSK + WPA2 PSKRestricting Wireless Access by MAC Address To restrict access based on MAC addresses Add Changing the Password Chapter ManagementUpgrading the Wireless Access Point Firmware Backing Up or Restoring Settings RangeMax Next Wireless Access Point WN802T Reference Manual Rebooting the RangeMax Next Viewing Available Wireless Station ListViewing Statistics Advanced Wireless Settings RangeMax Next Wireless Access Point WN802T Reference Manual Ethernet light is not lit Chapter TroubleshootingNo lights are lit on the access point Wlan light is not litCannot configure the access point from a browser When I enter a URL or IP address I get a timeout error Using the Reset Button to Restore Factory Default SettingsRangeMax Next Wireless Access Point WN802T Reference Manual Appendix a Default Settings and Technical Specifications Factory Default SettingsNetgear Technical Specifications Table A-2. WN802T Technical SpecificationsRangeMax Next Wireless Access Point WN802T Reference Manual Appendix B Related Documents Document LinkRangeMax Next Wireless Access Point WN802T Reference Manual Index NumericsIndex-2 Index-3 Index-4 Index-5 Index-6 Index-7 Index-8
Related manuals
Manual 2 pages 56.75 Kb Manual 96 pages 43.07 Kb

WN802T specifications

The NETGEAR WN802T is a wireless access point that plays a crucial role in enhancing network performance and connectivity in various environments, ranging from small offices to home networks. Designed to deliver a robust wireless experience, the WN802T comes equipped with several features and technologies that set it apart from other devices in its category.

One of its standout characteristics is its compliance with the IEEE 802.11a/b/g wireless standards, allowing it to operate on both the 2.4 GHz and 5 GHz frequency bands. This dual-band capability helps to reduce interference and enhances the overall performance of the network, making it ideal for environments with multiple wireless devices.

The WN802T supports advanced security features, including WPA, WPA2, and WEP encryption protocols. These security measures ensure that the data transmitted over the network remains secure from unauthorized access, providing peace of mind for users concerned about privacy and data protection.

Another key feature is its ability to deliver data transfer rates of up to 300 Mbps, thanks to its support for 802.11n technology. This high-speed connectivity allows users to stream HD videos, engage in online gaming, and transfer large files without noticeable lag or interruptions, making it a strong choice for bandwidth-intensive tasks.

For ease of use, the WN802T includes a web-based setup wizard that facilitates a straightforward installation process. Its user-friendly interface allows both novice and experienced users to configure settings quickly and efficiently, ensuring that the device can be integrated into any existing network with minimal hassle.

The device also includes features such as Quality of Service (QoS), which prioritizes bandwidth allocation for different applications and devices. This ensures that crucial tasks receive the necessary bandwidth, enhancing overall network performance during peak usage times.

Additionally, the WN802T is designed with multiple Ethernet ports, providing the flexibility to connect wired devices such as printers, laptops, and gaming consoles directly to the network. This hybrid capability allows users to take advantage of both wired and wireless connectivity, optimizing the overall network experience.

In summary, the NETGEAR WN802T is a highly functional access point that combines dual-band support, robust security features, high-speed data transfer rates, and user-friendly configuration, making it an exceptional choice for enhancing wireless connectivity in various settings. Its combination of performance and features makes it suitable for a wide array of applications, catering to the needs of users looking for reliable internet access.
Top Page Image Contents