NETGEAR WN31000RP manual Install the Extender, Place the Extender and Power It On

Page 4

Install the Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Power It On

1.Place the extender halfway between your router and the location that has poor WiFi coverage.

If it is not possible to place the extender at the halfway point, move the extender closer to the location with poor coverage, but still within the wireless range of the router.

2.Turn the On/Off switch on the side of the extender to the On position.

3.Plug the extender into a power outlet and wait 1 minute until the extender starts.

The Power LED lights green.

On/Off switch

4

Image 4
Contents Page Getting Started Find the Best Location Install the Extender Place the Extender and Power It On To connect using WPS  To connect with the web browser methodNew Extender WiFi Network Name Join the Extender WiFi Network  To join the extender networkExtender Performance Change the Extender Network Settings  To log in to the extender to change its settingsEnter mywifiext.net Select Setup WizardEthernet Port Connection Restore Factory Settings  To restore factory settingsSupport