NETGEAR R6300 manual Install Your Router, Prepare your modem

Page 4

Install Your Router

Make sure that your Internet service is active before you install the router. Follow steps 1 through 5.

	1. Prepare your modem.	1
	a. Unplug your modem’s	1
	a. Unplug your modem’s
	power.	DSL or cable
	b. If the modem has a battery	DSL or cable
	b. If the modem has a battery
	backup, remove its
	batteries.
	c. If your modem was already	Internet
	connected to another	Internet
	connected to another
	router, disconnect the cable
	between your modem and
	that router.
	Now your modem should be	Modem
	completely turned off, and	Modem
	completely turned off, and

cabled only to the wall jack for your Internet service.

2.Connect your modem.

2

Router

b

aModem

a.Plug in, then turn on your modem. (Replace the batteries if you removed them previously.)

b.With the yellow Ethernet cable that came with the router, connect your modem to the Internet port of your router.

2

Image 4

Contents Technical Support Prepare your modem Compliance Declarations of ConformityContents Install Your Router Prepare your modemPower on the router Preset Wireless Security Type http//routerlogin.netWireless Network Settings Add Wireless Devices to the Network WPS MethodAccess the Router to Make More Changes  To log in to the routerSelect the Enable Password Recovery check box  To change the password for the router user name To use password recovery to retrieve a forgotten password Troubleshooting ReadySHARE AccessIf the browser does not display the web On Windows systems, use any of these methodsReadySHARE Printer On Mac systems, do this Select Go Connect to ServerPage Page Page Page Other Features Trademarks Statement of Conditions

Related manuals

Manual 133 pages 57.42 Kb