D-Link DIR-412 manual Connect to a 3G Internet Service

Page 14

Section 2 - Installation

Connect to a 3G Internet Service

If you are using a 3G USB adapter to connect to the Internet, please follow the steps below:

1.Move the toggle switch to the 3G Router mode position and wait for the DIR-412 to reboot.

2.Insert your 3G USB adapter into the DIR-412’s 3G USB port. In most cases, the 3G adapter will automatically configure and connect to the Internet. This process may take up to one minute. Refer to http://www.dlink.com/DIR-412for a compatiblility list of supported 3G adapters.

3.Plug one end of Ethernet cable into the DIR-412 and the other end into your computer.

4.Verify the link lights on the router. The power light, Internet light, and the Wireless LAN light should be lit. If not, make sure your computer and router are powered on and verify the cable connections are correct.

Note: The 3G default setting for the DIR-412 is auto-config and always-on reconnect mode. With this setting, the DIR-412 will connect to the Internet automatically. If you do not want the DIR-412 to connect automatically, please disable auto-config and change the reconnect mode to manual.

Computer

DIR-412

3G Network

D-Link DIR-412 User Manual

10

Image 14
Contents Page Trademarks PrefaceManual Revisions Table of Contents 100 ProductPackageOverviewContents System Requirements Network RequirementsFeatures Hardware Overview ConnectionsOperating in WAN mode Top ViewSwitching Between WAN Mode/3G Router Mode Installation Before you BeginWireless Installation Considerations Connect to Cable/DSL WAN Mode Connect to a 3G Internet Service Configuration Web-based Configuration UtilityInternet Connection Setup Wizard 3G Mode Configuration Configuration 3G Internet Connection Manual Configuration 3G ModeUser Name Password Dial Number CountryInternet Connection Setup Wizard WAN Mode Configuration Configuration Configuration Configuration Other users may ignore these 2 settings Configuration Manual Configuration WAN Mode Static IP Address MAC AddressDynamic IP Address Dhcp Host NamePPPoE Username/Password Configuration Username Password Reconnect Mode Maximum Idle Time Pptp Username/PasswordAddress Mode Pptp IP Address Pptp Subnet Mask Configuration L2TP Username/Password User Name Password Reconnect ModeConfiguration Address Russia Pptp Dual AccessPptp Subnet Configuration Russia PPPoE Dual Access Configuration Wireless Settings Manual Wireless Network Setup RateConfiguration Network Settings Dhcp Server Settings Clients Dhcp ReservationReservations List the router Virtual Server Name IP Address SchedulePort Forwarding Firewall Application RulesName Trigger Network QoS EngineSpeed Network Filters Dhcp Client ScheduleWebsite Filters Website URL ScheduleFirewall Settings Enable SPI DMZ HostFirewall Rules ProtocolBand Width Advanced Wireless SettingsDtim Interval Wi-Fi Protected Setup PIN SettingsMulticast Streams Advanced Network SettingsUPnP WAN Ping Administrator Settings Saving Time SettingsComputer’s Time PC Settings Mail Settings To E-mail AddressReboot Device System SettingsLoad Settings from Local Hard Drive Update Firmware Testing DdnsSystem Check Schedules Days Time AddDevice Information General Displays the router’s time and firmware versionPrevious Next Clear LogsLog Type Statistics Internet Sessions Wireless Support Wireless Security What is WPA?Wireless Connection Setup Wizard Security Security Add Wireless Device with WPS Wizard Configure WPA-Personal PSK Select PSK from the PSK / EAP drop-down menuConfigure WPA-Enterprise Radius Connect to a Wireless Network Using WindowsSecurity Security Configure WPS Security Security Security Using Windows Vista Configure WPA/WPA2 Connecting to a Wireless Network Connect Using WCN Using Windows XP Configure WPA-PSK Connecting to a Wireless Network Troubleshooting Why can’t I access the web-based configuration utility?What can I do if I forgot my password? Ping url -f -l MTU value Troubleshooting Wireless Basics What is Wireless? Wireless Local Area Network WlanSmall Office and Home Office Wireless Personal Area Network WpanHome Centralize your router or Access Point Eliminate InterferenceWireless Modes SecurityNetworking Basics Check your IP addressStep SettingStatically Assign an IP address ConnectionsTechnical Specifications DimensionsContacting Technical Support For customers within the United StatesWarranty Limited WarrantyLimited Software Warranty Non-Applicability of WarrantyWhat Is Not Covered Disclaimer of Other WarrantiesTrademarks Limitation of LiabilityGoverning Law Copyright StatementFederal Communication Commission Interference Statement CE Mark WarningImportant Note Industry Canada Statement Registration

DIR-412 specifications

The D-Link DIR-412 is a versatile and robust wireless router that caters to both home users and small office environments. Known for its reliability and ease of use, the DIR-412 provides an efficient networking solution with a range of features that enhance connectivity and security.

One of the main features of the D-Link DIR-412 is its support for IEEE 802.11n wireless technology, which enables high-speed data transfer rates. With a wireless speed of up to 300 Mbps, the DIR-412 facilitates seamless streaming, online gaming, and web browsing, ensuring that multiple devices can connect simultaneously without lag. This makes it an ideal choice for households with several users or for small businesses requiring a stable internet connection.

The router comes equipped with four 10/100 Ethernet ports that allow for wired connections to devices such as computers, printers, and gaming consoles. This functionality ensures that users can benefit from stable connections where necessary, while still enjoying the flexibility of wireless connectivity for mobile devices.

Security is a significant consideration with the DIR-412. It offers multiple levels of security, including WPA/WPA2 encryption. This protection ensures that the wireless network is safeguarded from unauthorized access, providing users with peace of mind as they connect their devices. Additionally, the router features a robust firewall that helps to fend off potential cyber threats and keep personal data secure.

Another noteworthy feature of the D-Link DIR-412 is its user-friendly web interface, which simplifies the setup process and ongoing management of the network. The Quick Setup Wizard walks users through the installation process, making it accessible even for those with limited technical knowledge. Furthermore, the router supports DHCP, allowing for easy IP address assignment to connected devices without manual configuration.

The DIR-412 also includes Quality of Service (QoS) capabilities, enabling users to prioritize bandwidth for specific applications or devices. This feature is particularly useful in environments where internet use is heavy and prioritizing tasks can lead to a better experience for critical applications like video conferencing or online gaming.

In summary, the D-Link DIR-412 is a feature-packed wireless router that accommodates the needs of both home users and small businesses. With robust wireless speeds, excellent security features, and easy management options, it stands out as a reliable choice in the competitive router market. Its combination of essential performance features and user-centric design makes it a valuable asset for anyone looking to enhance their networking capabilities.