Section 4 - Security
Configure WPA-PSK and WPA2-PSK
It is recommended to enable encryption on your wireless Router before your wireless network adapters. Please establish wireless connectivity before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1.Log into the
2.Next to Security Mode, select Enable WPA Only Wireless Security (enhanced) or Enable WPA2 Only Wireless Security (enhanced).
3.Next to Cipher Mode, select TKIP, AES, or Both.
4.Next to PSK/EAP, select PSK.
5.Next to Network Key, enter a key (passphrase). The key is an alpha- numeric password
between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. Make sure you enter this key exactly the same on all other wireless clients.
6.Click Save Settings to save your settings. If you are configuring the Router with a wireless adapter, you will lose connectivity until you
enable
51 |