Connecting the DAP-1353 to your network, Antennas

Connecting the DAP-1353 to your network

A.Connect the power adapter to the receptor on the rear panel of the DAP-1353 and then plug the other end of the power adapter to a wall outlet or power strip. The power LED will turn ON to indicate proper operation.

B.Using an Ethernet cable, insert one end of the cable to the LAN port on the rear panel of the DAP-1353 and the other end of the cable to a switch.

Note: You can also connect the DAP-1353 directly to the computer that will be used for configuration. The Link LED will illuminate to indicate a proper Ethernet connection.

C. Computers with 802.11 b/g/draft n wireless adapters can connect to the DAP-1353.

C. Antennas

Used to broadcast wireless network and recieve connections from 802.11 b/g/draft n wireless clients.


	B. LAN Port	A. Power Receptor
	Connects DAP-1353 to a switch	Receptor for Power Adapter.
	or PC.

D-Link DAP-1353 Quick Install Guide