D-Link DI-774 manual Static Cable Connection

Page 76

Frequently Asked Questions (continued)

How can I setup my router to work with a Cable modem connection? (continued)

Step 3 Power cycle the cable modem and router:

Turn the cable modem off (first) . Turn the router off Leave them off for 2 minutes.** Turn the cable modem on (first). Wait until you get a solid cable light on the cable modem. Turn the router on. Wait 30 seconds.

** If you have a Motorola (Surf Board) modem, leave off for at least 5 minutes.

Step 4 Follow step 1 again and log back into the web configuration. Click the Status tab and click the Device Info button. If you do not already have a public IP Address

under the WAN heading, click on the DHCP Renew and Continue buttons.

Static Cable Connection

Step 1 Log into the web based configuration by typing in the IP Address of the router (default:192.168.0.1) in your web browser. The username is admin (all lowercase) and the password

is blank (nothing).

Step 2 Click the Home tab and click the WAN button. Select Static IP Address and enter your static settings obtained from the ISP in

the fields provided.

If you do not know your settings, you must contact your ISP.

Step 3 Click on Apply and then click Continue to save the changes.

Step 4 Click the Status tab and click the Device Info button. Your IP Address information will be displayed under the WAN heading.

76

Image 76

Contents Link Air Xpert DI-774 Contents Package Contents Introduction LAN ports WAN port is PowerAdapter Features LEDs Front Panel of Unit Wireless Basics Wireless Basics Setting up a Wireless Infrastructure2 Network Getting StartedUsing the Configuration Menu Home WizardUsing the Configuration Menu Home Wireless Open or Shared Wireless SettingsHome Wireless Open or Shared Channel Authentication WEP EncryptionKey Type KeysLifetime Home Wireless WPA AuthenticationRadius Server Home Wireless WPA-PSK Home WAN Dynamic IP Address Host Name MAC Address Clone Primary/Secondary DNSHome WAN Static IP Address Subnet Mask Gateway Address Primary/ Secondary DNSPassword Service NameHome WAN PPPoE PPPoEMaximum Idle TimeAuto-reconnect Home LANHome Dhcp Dynamic Host Control Protocol.Advanced Virtual Server Example #1 Example #2 Name Trigger Port Trigger Type Public Port Advanced ApplicationsPublic Type Advanced Filters IP Filters IP FiltersPort Protocol TypesAdvanced Filters URL Blocking Filters URL Blocking- KeywordsAdvanced Filters MAC Filters Filters MAC Filters Name MAC Address Dhcp ClientAdvanced Filters Domain Blocking FiltersDomain Blocking Permitted DomainsAdvanced Firewall Firewall RulesAction SourceAdvanced DMZ DMZWireless Transmit Power Beacon intervalPerformance Data RateTX Rates Select Open system or Shared KeyAdvanced Performance 802.11g CTS Mode Tools Admin Administrator Login NameUser Login Name Admin PasswordDefault Tools AdminTools Time Load Settings from Tools System System Settings Save Settings toRestore to Factory Tools Firmware Upgrade BrowseTools Misc Ping TestRestart Device Discard PingTools Cable Test Status Device Info Log SettingsStatus Log View Log Email Address Status Log Log Settings Smtp Server IP AddressLog Type Status Wireless Connected Client List Status StatsHelp Networking Basics Microsoft Windows XPNetworking Basics Enter a Computer description and a Computer name optional Workgroup nameNetworking Basics Networking Basics Networking Basics Network Setup Wizard Naming your Computer Right-click on My ComputerChecking the IP Address in Windows XP Computer nameSupport tab Control PanelConnections Network ConnectionsProperties Assigning a Static IP Address Windows XP/2000 Assigning a Static IP Address with Macintosh OSX Selecting a Dynamic IP Address with Macintosh OSX Checking the Wireless Connection by Pinging in Windows Me Troubleshooting Troubleshooting Select Hardware Tab ManagerAdapters Why can’t I get a wireless connection? Why does my wireless connection keep dropping?Resetting the DI-774 to Factory Default Settings Technical Specifications Advanced Firewall FeaturesTechnical Specifications Wireless Transmit Power Frequently Asked Questions Why can´t I access the web based configuration?Frequently Asked Questions LAN Settings button How can I find my IP Address in Windows 95, 98, or ME? How can I find my IP Address in Windows 2000/XP? How can I assign a Static IP Address in Windows XP? Places and select PropertiesYes Network Neigborhood icon Win ME MyClick on the DNS Configuration tab Click Specify an IP AddressDynamic Cable connection Static Cable Connection Frequently Asked Questions To set up your router How do I open ports on my router? How do I configure the DMZ Host? What is DMZ?Demilitarized Zone DI-774 Frequently Asked Questions How do I use PC Anywhere with my router? What are virtual servers?Click Click ContinueHow can I use eDonkey behind my D-Link router? FirewallHow do I set up my router for Socom on my Playstation 2? How can I use Gamespy behind my D-Link router? Private Port Public PortHow do I configure my router for KaZaA and Grokster? Configure the Game Port information on each computer How do I configure my router to play Warcraft 3?For the DI-604, DI-614+. DI-624, DI-754, DI-764, or DI-774 How do I set up my router to use iChat? -for Macintosh users How do I use NetMeeting with my D-Link router?Step Then Virtual Server Choose Apple menu System Preferences Choose View SharingFrequently Asked Questions What is NAT? Technical Support Warranty and Registration USA onlyPage Important Note