DIR-100 Ethernet Broadband Router
Configure Windows 2000 for DHCP
In the Control Panel,
1.In Network and
2.In the Local Area Connection Properties dialog box, select Internet Protocol (TCP/IP), and then click Properties.
3.In the Internet Protocol (TCP/IP) Properties dialog box, click the button labeled Obtain an IP address automatically.
4.
Your computer is now ready to use the Router’s DHCP server.
Windows 95 and Windows 98
First, check for the IP protocol and, if necessary, install it:
1.In the Menus task bar, click the Start button, point to Settings, and then click Control Panel.
2.The Network dialog box displays with a list of currently installed network components. If the list includes TCP/IP, and then the protocol has already been enabled, skip to Configure IP Information Windows 95, 98.
3.If TCP/IP does not display as an installed component, click Add. The Select Network Component Type dialog box displays.
4.Select Protocol, and then click Add. The Select Network Protocol dialog box displays.
5.Click on Microsoft in the Manufacturers list box, and then click TCP/IP in the Network Protocols list box.
6.Click OK to return to the Network dialog box, and then click OK again. You may be prompted to install files from your Windows 95/98 installation CD. Follow the instructions to install the files.
7.Click OK to restart the PC and complete the TCP/IP installation.
Configure Windows 95 and Windows 98 for DHCP
1.Open the Control Panel menu, and then click the Network icon.
2.Select the network component labeled TCP/IP, and then click Properties.
3.If you have multiple TCP/IP listings, select the listing associated with your network card or adapter.
4.In the TCP/IP Properties dialog box, click the IP Address tab.
5.Click the Obtain an IP address automatically option.
6.
7.Click Yes.
When it has restarted, your computer is ready to use the Router’s DHCP server.
61