D-Link DI-604 manual Static IP Address

Page 11

Static IP Address

If you selected Static IP Address, you will see the following page.

Enter in the IP address information provided to you by your ISP. You will need to enter in WAN IP Address, WAN Subnet Mask, WAN Gateway, and Primary DNS.

Click Next

Dynamic IP

Address

If you selected Dynamic IP Address, you will see the following page.

If your ISP requires you to enter a specific host name or specific MAC address, please enter it in. The CLONE MAC Address button is used to copy the

MAC address of your Ethernet adapter to the DI-604 WAN interface. Click Next

Dynamic IP

Address for

BigPond Cable

If you selected Dynamic

IP Address with RoadRunner Session Management, you will see the following page.

If your ISP requires you to enter a specific host name or specific MAC

address, please enter it in. The CLONE MAC Address button is used to copy the MAC address of your Ethernet adapter to the DI-604 WAN interface.

Click Next

Image 11

Contents DI-604 Contents Package Contents Introduction Features and BenefitsUser-Definable Application Sensing Tunnel Introduction to Broadband Router TechnologyIntroduction to Firewalls Virtual Server supportedIntroduction to Virtual Private Networking Introduction to Local Area NetworkingIP Security IPSec Point-to-Point Tunneling Protocol PptpGetting Started ResetLAN ports WAN port Power jack Type admin in the User Name field lower case Using the Configuration WizardDynamic IP Address e.g., Cable users Click NextStatic IP Address Static IP Address Pptp Setup Wizard Using the Configuration MenuHome WAN Dynamic IP Address WANHome WAN Static IP Address Home WAN Pppoe Home LAN Dhcp Server Choose Enable or DisableAdvanced Virtual Server Advanced Applications IP Address AdvancedfilterPage Advanced Firewall Inbound Filter Advanced Snmp Dynamic DNS Advanced DdnsAdvanced Routing Troubleshooting Winipcfg for Windows 95/98 Ipconfig for Windows 2000/NT/XP Network Connections Control PanelRight-click on Local Area Input your DNS server addresses Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Networking Basics Computer Name Tab in the System Properties window Windows XPRight-click on My Computer Select Properties and click Name Select Workgroup and enter the name of the Workgroup Checking the IP Address in Windows XP/2000 Type CommandDouble-click on Control Panel Windows 98/ME users winipcfg at the prompt. AddressAssigning a Static IP Address Highlight Technical Specifications Link Technical Support over the Telephone Phone Warranty and RegistrationContacting Technical Support Link Technical Support over the InternetWhat You Must Do For Warranty Service Trademarks

Related manuals

Manual 81 pages 18.37 Kb