D-Link 700AP manual Advanced Mode

Using the Configuration Utility (continued)

Advanced > Mode

Access Point: Select this option to use the DWL-700 AP as an access point in your network.

Wireless Client: Select this option to use the DWL-700AP as a wireless client in your network. A wireless client is a device that connects to the network through a router or an access point.

Remote AP MAC: Input the MAC Address of the remote AP to which the DWL-700AP will connect when it is in wireless client mode.

Site Survey: Click the Site Survey button to select a remote AP to which you wish to connect.

Repeater: Select this option to use the DWL-700AP to extend the reach of a remote

AP by repeating the signal.

Remote AP MAC: Input the MAC Address of the remote AP that will have its range extended by the DWL-700AP.

Site Survey: Click the Site Survey button to select a remote AP that you wish to repeat.