Linksys 2 manual Configuration Guide

Page 1

Linksys PAP 2

Configuration Guide

Step 1: Connect the Linksys PAP2 to your Broadband connection Use this illustration of the back of the ATA to connect it to your network.

1.Phone 1 – plug in your analog telephone cord:

2.Ethernet Port - use an Ethernet cable to connect your PAP2 to your router or modem:

3.Power connection - Connect the power to your PAP2:

Image 1
Contents Configuration Guide Next, we must verify that the PAP2 has a valid IP Address You have now completed the static IP configuration Manually Assigning a Static IP AddressAustralia Configure the PAP2 to connect to the VOBPhone NetworkDialling