Power and Ethernet LEDs Light Up

Connection	WGA600N

D.Connect the other end of the included network cable to the Ethernet port of your DIRECTV Receiver. (If the DIRECTV Receiver has dual ports, connect the cable to the top port.)

Connect Network Cable to DIRECTV Receiver, model number: HR20 700

Connect Network Cable to DIRECTV Receiver, model number: HR21

NOTE 3: If you use an Ethernet switch to connect your devices, then follow these instructions:

1.Connect the Gaming Adapter to your switch.

2.Disconnect the DIRECTV Receiver from the switch for ten seconds.

3.Re-connect the DIRECTV Receiver to your switch.

E.Wait until the Power and Ethernet LEDs on the front panel of the Gaming Adapter light up.

NOTE 4: Do not stack any devices on top of the Gaming Adapter; otherwise, they may interfere with its wireless performance.

6	Dual-Band Wireless-N Gaming Adapter Internet Connection Kit