Chapter 4
Advanced Configuration
Chapter 4:
Advanced Configuration
After setting up the Gateway with the Setup Wizard (located on the
The
NOTE: When first installing the Gateway, you should use the Setup Wizard on the Setup CD- ROM. If you want to configure advanced settings, use this chapter.
How to Access the Web-Based Utility
To access the
A login screen appears. Use the default user name and password, admin, unless you have changed them during the Setup Wizard. (You can set a new user name and password from the Administration tab’s Management screen.) Click OK to continue.
Login Screen
Setup > Basic Setup
The first screen that appears is the Basic Setup screen. This allows you to change the Gateway’s general settings.
Setup > Basic Setup
Internet Setup
The Internet Setup section configures the Gateway to your Internet connection. Most of this information can be obtained through your ISP.
Internet Connection Type
Select the appropriate encapsulation method from the
•RFC 2364 PPPoA
•RFC 2516 PPPoE
•RFC 1483 Routed
•IPoA
•RFC 1483 Bridged
•Bridge Mode Only
VC Settings
Configure your Virtual Circuit (VC) settings in this section. Multiplexing Select LLC or VC, depending on your ISP.