Chapter 3 | Installation |
2.Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router. Connect the other end to an Ethernet port on a network device, such as a computer or switch.
Repeat this step to connect more computers or other network devices to the Router.
|
| Connect to Port 1 |
|
| |
3. Connect | your | cable | or | DSL | modem’s |
Ethernet | cable | to the Router’s Internet port. | |||
If you | are | using the | DMZ/Internet port, | ||
then connect an Ethernet cable to the DMZ/Internet port. Connect the other end to a network device, such as a modem or public server.
Connect to the Internet Port
Connect to the DMZ/Internet Port
4.Power on the cable or DSL modem. If you have a network device connected to the DMZ/Internet port, power on the network device.
5.Connect the included power adapter to the Router’s Power port, and then plug the power adapter into an electrical outlet.
Connect the Power
6.The System LED on the front panel will light up as soon as the power adapter is connected properly.
7.Power on your computers and other network devices.
10/100 | 5 |