Linksys WRT54GH manual Setup MAC Address Clone, Wireless Basic Wireless Settings, TZO.com

Page 13

Chapter 3

Advanced Configuration

TZO.com

Setup > DDNS > TZO

E-mail Address, TZO Key, and Domain Name  Enter the settings of the account you set up with TZO.

Internet IP Address  The Router’s Internet IP address is displayed here. Because it is dynamic, it will change.

Status  The status of the DDNS service connection is displayed here.

Update  To manually trigger an update, click this button.

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.

Setup > MAC Address Clone

A MAC address is a 12-digit code assigned to a unique piece of hardware for identification. Some ISPs will require you to register a MAC address in order to access the Internet. If you do not wish to re-register the MAC address with your ISP, you may assign the MAC address you have currently registered with your ISP to the Router with the MAC Address Clone feature.

Setup > MAC Address Clone

MAC Address Clone

Enabled/Disabled  To have the MAC address cloned, select Enabled.

MAC Address  Enter the MAC address registered with your ISP here.

Clone My PC’s MAC  Click this button to clone the MAC address of the computer you are using.

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.

Wireless > Basic Wireless Settings

The basic settings for wireless networking are set on this screen.

Basic Wireless Settings

Wireless > Basic Wireless Settings

Network Mode  From this drop-down menu, you can select the wireless standards running on your network. If you have Wireless-G and Wireless-B devices in your network, keep the default, Mixed. If you have only Wireless-G devices, select Wireless-G Only. If you have only Wireless-B devices, select Wireless-B Only. If you do not have any wireless devices in your network, select

Disabled.

Network Name (SSID)  The SSID is the network name shared among all points in a wireless network. The SSID must be identical for all devices in the wireless network. It is case-sensitive and must not exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the same for all points in your wireless network. For added security, you should change the default SSID (linksys) to a unique name.

Standard Channel  Select the appropriate channel for your wireless network. If you are not sure which channel to select, then keep the default, Auto.

SSID Broadcast  When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router’s SSID, keep the default, Enabled. If you do not want to broadcast the Router’s SSID, then select Disabled.

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes.

Wireless-G Home Router with SpeedBurst

9

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Wireless-G Home Router with SpeedBurst Online Resources Icon DescriptionsCopyright and Trademarks Table of Contents Appendix D Regulatory Information Front Panel Horizontal PlacementBack Panel Side PanelSuggested Mounting Hardware Wall-Mounting PlacementAdditional Security Tips General Network Security GuidelinesSetup Basic Setup Access the Browser-Based UtilityInternet Setup Automatic Configuration DhcpPPPoE Static IP Telstra Cable Optional SettingsDhcp Server Setting Network SetupRouter IP Dhcp ReservationTime Settings Setup DdnsDdns Service DynDNS.orgWireless Basic Wireless Settings Setup MAC Address CloneBasic Wireless Settings MAC Address CloneWireless Security Wireless Wireless SecuritySecurity Mode WPA2 PersonalWireless MAC Filter Wireless Wireless MAC FilterAdvanced Wireless Access RestrictionFirewall Security FirewallInternet Filter Web Filter Security VPN PassthroughVPN Passthrough Summary Internet Access PolicySingle Port Forwarding Applications and Gaming Single Port ForwardingApplications & Gaming Port Range Triggering Applications and Gaming Port Range ForwardingPort Range Forwarding Port Range TriggeringDhcp Client Table Applications and Gaming DMZSystem Reboot Administration ManagementManagement Administration Diagnostics Administration LogDiagnostics LogAdministration Firmware Upgrade Administration Factory DefaultsFactory Defaults Firmware UpgradeStatus Local Network Status RouterWireless Network Status Wireless NetworkAppendix a Troubleshooting Appendix B Specifications Exclusions and Limitations Limited WarrantyObtaining Warranty Service Technical Support FCC Statement Safety Notices Industry Canada StatementFCC Radiation Exposure Statement Industry Canada Radiation Exposure StatementAvis d’Industrie Canada Wireless DisclaimerDansk Danish Miljøinformation for kunder i EU Regulatory Information Norsk Norwegian Miljøinformasjon for kunder i EU Regulatory Information Software Licenses Cisco ProductsSchedule Cisco Software License Agreement Software End User License Agreement Software End User License Agreement Schedule Network Magic Features Schedule 3-A Schedule Open Source and Third Party LicensesPreamble Software End User License Agreement No Warranty GNU Lesser General Public License Schedule 3-BSoftware End User License Agreement Software End User License Agreement Software End User License Agreement END of Schedule 3-B OpenSSL License Schedule 3-COriginal SSLeay License END of Schedule 3-C
Top Page Image Contents