1.19Select “DHCP” from the menu at the top of the screen. This will allow you to set the DHCP Scope for the workstations.
Please insure that the Range Start & Range End are the beginning & ending of the range provided by Galileo International excluding the address that will be used by the router. Start Range will usually be 1 more than the address of the router itself.
1.20Reserve the IP Address for the GPM/FPM workstation. In order for the inbound Wakeup message to reach the GPM Workstation we need to reserve a static address for the GPM workstation. The router allows for this by the Static Entry field. You will need to obtain the Physical Address of the NIC card in the GPM box. You can accomplish this by starting a DOS command box on the GPM workstation.
START RUN CMD (for Windows 2000 or Windows XP) START RUN COMMAND (for Windows 9X)
19