Martin Audio WLXGS manual Main to sub-woofer delays, Reference settings

Page 8

Main to sub-woofer delays

Reference settings

The following table shows system delays to align various combinations of W8L Series main and sub-woofer system. These should be treated as important initial settings and will work without further adjustments where grilles are alignment. They are a good starting point for further time alignment.

The main W8L, W8LC and W8LM parameters will already exist in the standard presets but you will need to check the user adjustable HPF (High Pass Filter) and Delay (grilles aligned) are set according to the table.

Sub-woofers usually take their signal from a separate controller for W8L and W8LC systems because our standard band zoned presets use all six bands.

The WLX sub-woofers signal will be on controller output channel 1 for standard W8LM set-ups. The WLX signal will be on channel 6 where a separate sub-woofer mix is to be used using a W8LM + WLX configuration.

Image 8

Contents WLX, Wlxgs W8LC Grid W8LC Lifting Bar IntroductionRigging options Specifications Pin-outs and cabling InputCable and panel connector part numbers Controller settings for Wavefront WLXsRecommended loudspeaker cable Cable run vs copper core cross sectional areaController Reference Delays Sub-woofer crossover and alignmentCrossover frequencies Time alignmentW8LM Active mono Lower HFW8LM Passive mono Lower full-rangeMain to sub-woofer delays Reference settingsWLX + 8 x W8LC mixed array for orchestral applications Flown WLXsSide-by-side arrays Stacked WLXs or WLXGSs Stacked system alignment Please notePower amplifier recommendations Power capabilityGain and level settings Mains safetyPower reserve Amplifier load tolerancePlacement Rack mountingArray shapes vs coverage Page Coverage angle for tightly packed flat fronted arrays 6dB CoverageVertical Boundary effects Vertical -6dB coverageWLX/WLXGS High Vertical coverage 47Hz 94Hz 188Hz Horizontal Boundary effects Horizontal 6dB coverageWLX/WLXGS Wide Horizontal coverage 43Hz 86Hz 172Hz Spacing Gap Smooth coverage range 43Hz 86Hz 172Hz Horizontal splaysWLX/WLXGS Wide Horizontal coverage Stacked WLX/WLXGS application examples Page Front view Side view Alternative set-up for wide venuesThrust stages Reflections Tutorial on spaced systemsIsland stages not shown Addition & Subtraction Polar variations with frequency Page Real world Electronic steering Important NoteProcedure ExampleGoing further

WLX, WLXGS specifications

The Martin Audio WLXGS and WLX line array systems represent a remarkable advancement in professional audio technology, providing powerful and precise sound reinforcement for various applications, from concerts to corporate events. These systems are part of Martin Audio's commitment to delivering high-performance sound solutions that are both reliable and easy to use.

At the heart of the WLXGS and WLX systems is their innovative design, which integrates advanced acoustic engineering with cutting-edge materials. The WLXGS, as a ground stack subwoofer, features two 18-inch drivers, which are optimized for deep bass response and efficiency. This design ensures that the low-frequency output is not only impactful but also well-controlled across a wide spectrum of environments. The WLX model, on the other hand, is designed for array applications, offering extreme versatility and scalable configurations suited for varying audience sizes.

One of the standout features of both the WLXGS and WLX systems is their ability to deliver exceptional sound quality. With a frequency response that extends from deep bass up through the midrange and treble frequencies, the systems maintain clarity and detail no matter the sound pressure level. This is crucial for live sound applications where vocal intelligibility and instrument clarity are essential.

The technology used in these speakers is also noteworthy. Martin Audio has employed its proprietary Optimized Digital Signal Processing (DSP) technology, which allows for precise tuning and control of sound characteristics. This technology helps mitigate issues such as interference and feedback, ensuring that the sound remains consistent and professional throughout an event.

Additionally, the WLXGS and WLX systems are designed for ease of deployment. The lightweight construction, combined with integrated rigging and stacking features, allows for quick setup and teardown, making them ideal for touring as well as fixed installations. The systems include integrated handles and optional accessories that facilitate transport and arrangement, making them user-friendly for audio engineers and technicians.

In conclusion, the Martin Audio WLXGS and WLX systems bring together powerful performance, innovative technologies, and practical design. Their combination of deep low-frequency output, clarity, and ease of use makes them a top choice for professionals in the audio industry, ensuring that audiences experience music and sound as intended by the artists and producers. Whether for large-scale events or intimate gatherings, the WLXGS and WLX deliver reliable performance that meets the high standards of modern sound reinforcement.