Linksys WRT54GL manual Power LED keeps flashing

Page 75

Wireless-G Broadband Router

15.I can’t access my e-mail, web or I am getting corrupted data from the Internet.

The Maximum Transmission Unit (MTU) setting may need to be adjusted. By default, the MTU is set at 1500. For most DSL users, it is strongly recommended to use MTU 1492.

•If you are having some difficulties, perform the following steps:

1.To connect to the Router, go to the web browser, and enter http://192.168.1.1 or the IP address of the Router.

2.Enter the password, if asked. (The default password is admin.)

3.Look for the MTU option, and select Manual. In the Size field, enter 1492.

4.Click the Save Settings button to continue.

•If your difficulties continue, change the Size to different values. Try this list of values, one value at a time, in this order, until your problem is solved:

1462

1400

1362

1300

16.The Power LED keeps flashing.

The Power LED flashes when the device is first powered up. Meantime, the system will boot up itself and check for proper operation. After finishing the checking procedure, the LED stays solid to show that the system is working fine. If the LED keeps flashing after this time, the device is not working properly. Try to flash the firmware by assigning a static IP address to the computer, and then upgrade the firmware. Try using the following settings, IP Address: 192.168.1.50 and Subnet Mask: 255.255.255.0.

17.When I enter a URL or IP address, I get a time-out error or am prompted to retry.

•Check if other PCs work. If they do, ensure that your workstation’s IP settings are correct (IP Address, Subnet Mask, Default Gateway, and DNS). Restart the computer that is having a problem.

•If the PCs are configured correctly, but still not working, check the Router. Ensure that it is connected and powered on. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power connections.)

•If the Router is configured correctly, check your Internet connection (DSL/cable modem, etc.) to see if it is working correctly. You can remove the Router to verify a direct connection.

•Manually configure the TCP/IP settings with a DNS address provided by your ISP.

•Make sure that your browser is set to connect directly and that any dial-up is disabled. For Internet Explorer, click Tools, Internet Options, and then the Connection tab. Make sure that Internet Explorer is set to Never dial a connection. For Netscape Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet.

Appendix A: Troubleshooting

67

Common Problems and Solutions

Page 74 Page 76
Image 75
Page 74 Page 76
Contents 802 GHz .11g Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix C Upgrading Firmware Appendix D Windows Help Appendix a TroubleshootingAppendix B Wireless Security Common Problems and Solutions Frequently Asked QuestionsRouter’s Back Panel List of Figures23 Setup Wizard’s Configure Wireless Settings Screen 19 Wireless Tab Wireless Security WPA2 Personal Figure E-5 MAC Address Clone Welcome IntroductionWhat’s in this User Guide? Wireless-G Broadband Router Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Ssid service set identifier your wireless network’s namePlanning Your Wireless Network Network Layout Back Panel Getting to Know the Wireless-G Broadband RouterCisco logo Front PanelOverview Connecting the Wireless-G Broadband RouterConnecting Your Network Devices Connecting Another Router Hardware Installation for Connection to Another RouterConnecting Your Network Devices Using the Setup Wizard Setting up the Wireless-G Broadband RouterSetup Wizard’s Disconnect the Modem from PC Screen Setup Wizard’s Connect a Network Cable to a PC Screen Setup Wizard’s Power on the Router Screen Cable or Dhcp Setup Wizard’s Check the Router’s Status ScreenStatic IP DSL PPPoEPptp L2TP Telstra 16 Setup Wizard’s Advanced Internet Settings Telstra Screen18 Setup Wizard’s Configure Wireless Settings Screen 19 Setup Wizard’s SecureEasySetup Screen Using the Router’s SecureEasySetup Feature24 Setup Wizard’s Confirm New Settings Screen 26 Setup Wizard’s Congratulations Screen 27 Setup Wizard’s Configure Wireless Settings Screen Manually Configuring the Router’s Wireless SettingsWPA-PSK WEP 128-Bit WEP 64-Bit33 Setup Wizard’s Congratulations Screen 34 Setup Wizard’s Welcome Start Wizard Screen Using SecureEasySetup to Configure Your Notebook37 Configure Wireless Settings #2 Screen 38 Your Wireless Settings Screen Configuring the Wireless-G Broadband Router Internet Setup Setup Tab Basic SetupPPPoE Connection Type Optional Settings Router IP 12 Setup Tab Ddns Setup Tab Ddns13 Setup Tab MAC Address Clone Setup Tab MAC Address Clone14 Setup Tab Advanced Routing Gateway Setup Tab Advanced RoutingWireless Tab Basic Wireless Settings 17 Wireless Tab Wireless Security WPA Personal Wireless Tab Wireless Security20 Wireless Tab Wireless Security WPA2 Enterprise 21 Wireless Tab Wireless Security Radius 23 Wireless Tab Wireless MAC Filter Wireless Tab Wireless MAC FilterSetting Wireless Tab Advanced Wireless SettingsWireless-G Broadband Router Security Tab VPN Passthrough Security Tab FirewallTo create an Internet Access policy Access Restrictions Tab Internet AccessTo create an Inbound Traffic policy 31 Port Services33 Applications and Gaming Tab Port Range Forward Applications and Gaming Tab Port Range ForwardPort Triggering Applications & Gaming Tab Port TriggeringEthernet Port Priority Applications and Gaming Tab DMZApplications and Gaming Tab QoS Device PriorityApplication Port Priority Administration Tab Log Administration Tab Management39 Administration Tab Diagnostics Administration Tab DiagnosticsAdministration Tab Factory Defaults Administration Tab Firmware UpgradeAdministration Tab Config Management 45 Status Tab Router Status Tab Router46 Status Tab Local Network Status Tab Local Network48 Status Tab Wireless Status Tab WirelessAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Broadband Router Open a command prompt. For Windows 98SE and Me TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Wireless-G Broadband Router My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED keeps flashing Frequently Asked Questions Does the Router support ICQ send file? What is Network Address Translation and what is it used for?How can I block corrupted FTP downloads? Is the Router cross-platform compatible? What is DMZ Hosting?What are the advanced features of the Router? What is the Ieee 802.11g standard?What is ad-hoc mode? What is the Ieee 802.11b standard?What Ieee 802.11g features are supported? What Ieee 802.11b features are supported?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? How do I resolve issues with signal loss? What is WEP?What is a MAC Address? How do I reset the Router?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Broadband Router Appendix C Upgrading Firmware Appendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFigure E-4 MAC Address Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Wireless-G Broadband Router Operating Temp 0ºC to 40ºC 32ºF to 104ºF Appendix G SpecificationsWireless Security StandardsStorage Temp Operating HumidityStorage Humidity Limited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationSafety Notices Appendix J Contact Information
Top Page Image Contents