Linksys E2100L manual Wi-Fi Protected Setup

Page 21

Linksys E2100L

Channel  Select the appropriate channel for your wireless network.. If you are not sure which channel to select, then keep the default, Auto..

SSID Broadcast  When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router.. To broadcast the Router’s SSID, keep the default, Enabled.. If you do not want to broadcast the Router’s SSID, then select Disabled..

Click Save Settings to apply your changes, or click Cancel Changes to clear your changes..

Wi-Fi Protected Setup

There are three methods available.. Use the method that applies to the client device you are configuring..

Wireless > Basic Wireless Settings (Wi-Fi Protected Setup)

NOTE: Wi-Fi Protected Setup configures one client device at a time.. Repeat the instructions for each client device that supports Wi-Fi Protected Setup..

•• Wi-Fi Protected Setup Button  Use this method if your client device has a Wi-Fi Protected Setup button..

a.Click or press the Wi-Fi Protected Setup button on the client device..

b.Click the WiFi Protected Setup button on the Router’s Wi-Fi Protected Setup screen..

The Wi-Fi Protected Setup LED flashes blue for two minutes during the Wi-Fi Protected Setup process and lights up blue when the Wi-Fi Protected Setup process is successful..

The LED lights up amber if there is an error during the WiFi Protected Setup process.. Make sure the client device supports WiFi Protected Setup.. Wait until the LED is off, and then try again..

The LED flashes when a WiFi Protected Setup session is active.. The Router supports one session

Chapter 3: Advanced Configuration

at a time.. Wait until the LED is continuously lit, or off before starting the next Wi-Fi Protected Setup session..

c.After the client device has been configured, click OK on the Router’s Wi-Fi Protected Setup screen.. Then refer back to your client device or its documentation for further instructions..

•• Enter Client Device PIN on Router  Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal Identification Number)..

a.Enter the PIN from the client device in the field on the Router’s Wi-Fi Protected Setup screen..

b.Click the Register button on the Router’s Wi-Fi Protected Setup screen..

c.After the client device has been configured, click OK on the Router’s Wi-Fi Protected Setup screen.. Then refer back to your client device or its documentation for further instructions..

•• Enter Router PIN on Client Device  Use this method if your client device asks for the Router’s PIN..

a.On the client device, enter the PIN listed on the Router’s Wi-Fi Protected Setup screen.. (It is also listed on the label on the bottom of the Router..)

b.After the client device has been configured, click OK on the Router’s Wi-Fi Protected Setup screen.. Then refer back to your client device or its documentation for further instructions..

The Network Name (SSID), Security, and Passphrase are displayed at the bottom of the screen..

NOTE: If you have client devices that do not support Wi-Fi Protected Setup, note the wireless settings, and then manually configure those client devices..

Advanced Wireless-N Router

18

Image 21
Contents User Guide Contents Safety Notices Appendix C Specifications Appendix D Warranty InformationAvis d’Industrie Canada Wireless Disclaimer Appendix F Software End User License AgreementProduct Overview TopBack Horizontal Placement Wall-Mounting PlacementBottom To install the Router Attach the antennas to the Router InstallationCisco Connect Insert the CD into your CD-ROM driveConnection steps are displayed Plug the power adapter into an electrical outletInstallation is complete.. Click OK Local Access versus Guest AccessWhen Cisco Connect starts up, the main menu appears Guest Access versus Local Access DiagramMain Menu Router Settings Main Menu Guest AccessComputers and Other Devices Main Menu Computers and DevicesPlease wait while settings are copied to the Easy Setup Key Create or Update the Easy Setup KeyConnect Manually After your device connects, click NextWireless Printer Guest AccessEasy Setup Key Router SettingsChange Router Name or Password PersonalizeHow to Access Cisco Connect How to Exit Cisco ConnectHow to Access the Browser-Based Utility Advanced ConfigurationSetup Basic Setup Internet SetupStatic IP Automatic Configuration DhcpPPPoE MinutesTelstra Cable Optional SettingsDhcp Server Settings Network SetupRouter IP Dhcp ReservationTime Settings Ddns ServiceDynDNS..org Setup Advanced Routing Setup MAC Address CloneMAC Address Clone Advanced RoutingWireless Basic Wireless Settings Manual SetupRouting Table Wi-Fi Protected Setup Security Mode Wireless Wireless SecurityPersonal Options Office OptionWEP Wireless Advanced Wireless Settings Wireless Wireless MAC FilterWireless MAC Filter Advanced WirelessLinksys E2100L Security VPN Passthrough Security FirewallFirewall Web FiltersDisk Management Storage DiskShared Folder Format DiskClaim Disk Create a Shared FolderStorage Media Server SetupEdit a Shared Folder UPnP Media ServerStorage FTP Server Database SetupAdd a Media Folder FTP ServerAccess Create an FTP FolderFTP Summary Edit an FTP Folder Storage AdministrationInformation After you clicked Edit, the FTP Folder screen appearsUser Management Group ManagementCreate or Edit a Group Account Create or Edit a User AccountAccess Restrictions Internet Access Internet Access PolicySummary Single Port Forwarding Applications and Gaming Single Port ForwardingApplications & Gaming Port Range Triggering Applications and Gaming Port Range ForwardingPort Range Forwarding Port Range TriggeringQoS Quality of Service Applications and Gaming DMZApplications and Gaming QoS Applications CategoryOnline Games Add a New GameAdministration Management SummaryManagement Log Administration LogDiagnostics Administration DiagnosticsTraceroute Test Ping TestAdministration Factory Defaults Administration Firmware UpgradeStatus Router Status Local Network Status Wireless NetworkClick the Connections tab Appendix a TroubleshootingClick OK Connect the USB storage device directly to your computerClick the Exceptions tab Install the USB Storage Device Appendix B How to Install and Access USB StorageAccess the USB Storage Device OverviewMap a Drive Double-click the mapped drive to access it Access the Mapped DriveWindows Vista Click FinishOn your desktop, double-click the Network icon Windows XP Create a Shared Folder, On your desktop, double-click the My Computer iconMap a Drive Mac OS From your desktop, select Go NetworkDouble-click the server name Click Connect As Display the Shared Folder on the Desktop Add to Startup Login ItemsGo to the Apple menu and select System Preferences Click AccountsAccess the Browser-Based Utility Advanced Configuration Advanced Users OnlyDrag the shared folder to the Login Items window Click the Storage tab Click the Disk tabCreate a User Group Account Click the Storage tab Click the Administration tabCreate a User Account Appendix C Specifications A, Canada, Asia Pacific, Australia, New Zealand Appendix D Warranty InformationObtaining Warranty Service Appendix E Regulatory Information Avis de non-responsabilité concernant les appareils sans fil Wireless DisclaimerCisco Products Appendix F Software End User License AgreementSoftware Licenses Schedule Cisco Software License AgreementAdvanced Wireless-N Router Advanced Wireless-N Router Advanced Wireless-N Router Schedule 2-A Schedule Open Source and Third Party LicensesPreamble Version 2, JuneAdvanced Wireless-N Router No Warranty Version 2..1, February Schedule 2-BAdvanced Wireless-N Router Advanced Wireless-N Router Advanced Wireless-N Router END of Terms and Conditions END of Schedule 2-B Schedule 2-C OpenSSL LicenseOriginal SSLeay License END of Schedule 2-C 10012110NC-JL