Linksys BEFSR81 manual Copyright & Trademarks

Page 2

COPYRIGHT & TRADEMARKS

Copyright © 2000 Linksys, All Rights Reserved. Instant Broadband is a registered trademark of Linksys. Microsoft, Windows, and the Windows logo are registered trade- marks of Microsoft Corporation. All other trademarks and brand names are the proper- ty of their respective proprietors.

LIMITED WARRANTY

Linksys guarantees that every Instant Broadband EtherFast Cable/DSL Router is free from physical defects in material and workmanship under normal use for one year from the date of purchase. If the product proves defective during this warranty period, call Linksys Customer Support in order to obtain a Return Authorization Number. BE SURE TO HAVE YOUR PROOF OF PURCHASE AND A BARCODE FROM THE PRODUCT'S PACKAGING ON HAND WHEN CALLING. RETURN REQUESTS CANNOT BE PROCESSED WITHOUT PROOF OF PURCHASE. When returning a product, mark the Return Authorization Number clearly on the outside of the package and include your original proof of purchase.

IN NO EVENT SHALL LINKSYS’ LIABILITY EXCEED THE PRICE PAID FOR THE PROD- UCT FROM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAM- AGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING SOFT- WARE, OR ITS DOCUMENTATION. LINKSYS DOES NOT OFFER REFUNDS FOR ANY PRODUCT. Linksys makes no warranty or representation, expressed, implied, or statu- tory, with respect to its products or the contents or use of this documentation and all accompanying software, and specifically disclaims its quality, performance, mer- chantability, or fitness for any particular purpose. Linksys reserves the right to revise or update its products, software, or documentation without obligation to notify any individ- ual or entity. Please direct all inquiries to:

Linksys P.O. Box 18558, Irvine, CA 92623.

FCC STATEMENT

This Instant Broadband EtherFast Cable/DSL Router has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi- ate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications. However, there is no guaran- tee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna

Increase the separation between the equipment or device

Connect the equipment to an outlet other than the receiver’s

Consult a dealer or an experienced radio/TV technician for assistance

010

Image 2
Contents EtherFast Cable/DSL Router Copyright & Trademarks Table of Contents Introduction8-Port Router’s Rear Panel Package ContentsSystem Requirements Reset Button 8-Port Router’s Front Panel LEDsOverview Connecting The Cable/DSL Router to Your NetworkConnecting Everything Together & Booting Up About Static & Dynamic IP AddressesConfiguring Your Network with the Cable/DSL Router Configuring the Cable/DSL RouterCable/DSL Router’s Setup page will appear Configuring Your PCs to Connect to the Cable/DSL Router Quick & Easy Administration Cable/DSL Router’s Web-based UtilitySetup Password Status EtherFast Cable/DSL RouterDhcp HelpTo Modify Filter Settings Filters ForwardingDynamic Routing Static Routing DMZ Host Quality of Service Troubleshooting Common Problems and SolutionsFrequently Asked Questions Uses NAT and TCP/IP port inspections Snmp Functions How to Ping Your ISP’s E-mail & Web AddressesAppendix Installing the TCP/IP Protocol Step Two Pinging for a Web AddressTwisted-Pair Cabling Environmental Port Router SpecificationsCrimping Your Own Network Cables Customer Support Web FTP SiteCopyright 2000 Linksys, All Rights Reserved
Related manuals
Manual 72 pages 60.5 Kb