NETGEAR EX2700 manual Connect with WPS

Page 6

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without typing the network name and password.

Note:  WPS does not support WEP network security. If you are using WEP security, follow the instructions in Connect with Web Browser Setup on page 7.

1.Press the WPS button on the side panel of the extender. The WPS LED blinks.

2.Within two minutes, press the WPS button on your router or access point.

The WPS LED on the extender lights solid green, the Router Link LED lights, and the extender connects to your existing WiFi network.

If the Router Link LED does not light, try again. If it still does not light, see Connect with Web Browser Setup on page 7.

3.Find the new extender network name.

The extender’s wireless network name (SSID) changes to your existing WiFi network name, with _EXT at the end of the name, for example:

Existing WiFi network name. MyNetworkName

New extended network name. MyNetworkName_EXT

6

Image 6
Contents Installation WiFi Range Extender Getting StartedMeet Your Extender LED Descriptions Install the WiFi Extender Place the Extender and Apply PowerConnect with WPS Connect with Web Browser Setup Page Page Find the Best Location Connect an Ethernet-Enabled Device Log In to Access Extender Settings Frequently Asked Questions Page Select Attached Devices Technical Support
Related manuals
Manual 35 pages 42.96 Kb