NETGEAR HR314 manual Check the setup

Page 8

Check the setup

•The Test light turns on for a few seconds and then goes off.

Note: If the Test light remains on for more than one minute, go to Troubleshooting on page 13.

•The Power and Internet Link lights should be lit.

•The Wireless Link light should be lit.

•If your computer is on, the Local Link light should be on for the port number that your computer is connected to.

Note: If the port connection is a 100 Mbps connection, the 100 light should be on.

If either the Power, Internet Link, or Local port Link light isn’t lit, go to Troubleshooting on page 13.

7

Image 8

Contents Installation Guide Installation Overview IntroductionWhat’s in the Box Category 5 Cat 5 Ethernet patch cable Connection information Login Name Host and Domain NamesFixed or static IP address DNS server address informationInstall the Router Check the setup Router and Restart the Network Windows Operating SystemRestarting the Network Macintosh Operating SystemLinux or Unix Operating System Configure the Router and Test the Connection Test the ConnectionWireless PCs Connect and Configure Other Computers OptionalWired PCs Optional Configurations Internet Services OptionalTroubleshooting No lights are lit on the routerTest light doesn’t turn off Internet Link light doesn’t light upCannot get onto the Internet with a computer Resetting TCP/IP Properties Windows Glossary of Terms Router System Requirements Router SpecificationsEnvironmental Specifications Voluntary Control Council for Interference Vcci Statement Technical Support NETGEAR, Inc By NETGEAR, Inc. All rights reserved