NETGEAR CG814WG manual Related Documents, Domain Name Server

Page 65

Hardware Manual for the Model CG814WG Wireless Cable Modem Gateway

If a device sends data to another station on the network and the destination MAC address is not yet recorded, ARP is used. An ARP request is broadcast onto the network. All stations on the network receive and read the request. The destination IP address for the chosen station is included as part of the message so that only the station with this IP address responds to the ARP request. All other stations discard the request.

Related Documents

The station with the correct IP address responds with its own MAC address directly to the sending device. The receiving station provides the transmitting station with the required destination MAC address. The IP address data and MAC address data for each station are held in an ARP table. The next time data is sent, the address can be obtained from the address information in the table.

For more information about address assignment, refer to the IETF documents RFC 1597, Address Allocation for Private Internets, and RFC 1466, Guidelines for Management of IP Address Space.

For more information about IP address translation, refer to RFC 1631, The IP Network Address Translator (NAT).

Domain Name Server

Many of the resources on the Internet can be addressed by simple descriptive names such as www.NETGEAR.com. This addressing is very helpful at the application level, but the descriptive name must be translated to an IP address in order for a user to actually contact the resource. Just as a telephone directory maps names to phone numbers, or as an ARP table maps IP addresses to MAC addresses, a domain name system (DNS) server maps descriptive names of network resources to IP addresses.

When a PC accesses a resource by its descriptive name, it first contacts a DNS server to obtain the IP address of the resource. The PC sends the desired message using the IP address. Many large organizations, such as ISPs, maintain their own DNS servers and allow their customers to use the servers to look up addresses.

Networks, Routing, and Firewall Basics

D-9

Image 65
Contents NETGEAR, Inc Trademarks Voluntary Control Council for Interference Vcci Statement Page Contents Appendix B Contents Vii Viii Contents Typographical Conventions About This ManualAudience Special Message Formats Chapter Hardware Overview Powerful, True FirewallAbout the CG814WG Built-in Cable ModemConfigurable Auto Uplink Ethernet Connection 802.11g Standards-based Wireless NetworkingProtocol Support Easy Installation and ManagementUSB Port Hardware Overview Gateway’s Front Panel What’s in the Box?USB CG814WG Rear Panel Gateway’s Rear PanelHardware Overview Preparing Your Computers for TCP/IP Networking Chapter Preparing Your NetworkInstall or Verify Windows Networking Components Configuring Windows 98 SE and Me for TCP/IP NetworkingPreparing Your Network Locate your Network Neighborhood icon Enabling DhcpPrimary Network Logon is set to Windows logon Verifying TCP/IP Properties Selecting Windows’ Internet Access MethodConfiguring Windows 2000 or XP for TCP/IP Networking Dhcp Configuration of TCP/IP in Windows XP Dhcp Configuration of TCP/IP in Windows XP orPreparing Your Network TCP/IP details are presented on Support tab Verify that the Obtain an IP address Dhcp Configuration of TCP/IP in WindowsPreparing Your Network Obtain an IP address automatically is selected Verifying TCP/IP Properties for Windows XP Verifying the Readiness of Your Internet Account Are Login Protocols Used?What Is Your Configuration Information? Select the Gateway tab Obtaining ISP Configuration Information from Your ComputerRestarting the Network Preparing Your Network Basic Functions Appendix a TroubleshootingLocal Link LEDs Not On Power LED Not OnTest LED Stays On Troubleshooting a TCP/IP Network Using a Ping Utility Troubleshooting the ISP ConnectionTesting the LAN Path to Your Gateway Cable Link LED Not OnTesting the Path from Your PC to a Remote Device Erasing the Current/Restoring the Factory Configuration Troubleshooting Appendix B Glossary Internet, which are published as RFCs Request for Comment at Information, a block of data, and a checksum Glossary Observe Location and Range Guidelines Appendix C Configuring Wireless Security in Windows XPWhat You Will Need Before You Begin Two Basic Operating Modes CG814WG Default Wireless Configuration Settings For Windows XP Users Installing a CG814WG Basic Installation InstructionsInstall the CG814WG Wireless Cable Modem Gateway Configure your CG814WG Verify wireless connectivity to your network Interpreting the LED on the CG814WG Wireless Connection IndicatorsColor Condition Description Interpreting System Tray Icon ColorsBasic Troubleshooting Tips Related Publications Basic Router Concepts Appendix D Networks, Routing, and Firewall BasicsIP Addresses and the Internet What is a Router?Routing Information Protocol Figure D-1 Three Main Address Classes Equals NetmaskFigure D-2 Example of Subnetting a Class B Address Subnet AddressingTable D-1. Netmask Notation Translation Table for One Octet Single IP Address Operation Using NAT Figure D-3 Single IP Address Operation Using NAT MAC Addresses and Address Resolution ProtocolDomain Name Server Related DocumentsInternet Security and Firewalls IP Configuration by DhcpWhat is a Firewall? Stateful Packet Inspection Uplink Switches and Crossover CablesEthernet Cabling Cable Quality