InstAllAtion ConsiderAtions

The following is a list of tools you will need for installing the Lightning Audio:

Adequate Length	Voltmeter
Wire strippers	Battery post wrench
Electric hand drill w/assorted bits	Wire cutters
Adequate Length— Red Power Wire	Assorted connectors
Adequate Length— Remote Turn-on Wire	Wire crimpers
Adequate Length— Black Grounding Wire

This section focuses on some of the vehicle considerations for installing your new Lightning Audio amplifier. Checking your battery and present sound system, as well as pre-planning your system layout and best wiring routes will save installation time. When deciding how to lay out your new system, be sure that each component will be easily accessible for making adjustments.

Before beginning any installation, be sure to follow these simple rules:

1.Be sure to carefully read and understand the instructions before attempting to install the amplifier.

2.For safety, disconnect the negative lead from the battery prior to beginning the installation.

3.For easier assembly, we suggest you run all wires prior to mounting your amplifier in place.

4.Route all of the RCA cables close together and away from any high current wires.

5.Use high quality connectors for a reliable installation and to minimize signal or power loss.

6.Think before you drill! Be careful not to cut or drill into gas tanks, fuel lines, brake or hydraulic lines, vacuum lines or electrical wiring when working on any vehicle.

7.Never run wires underneath the vehicle. Running the wires inside the vehicle provides the best protection.

8.Avoid running wires over or through sharp edges. Use rubber or plastic grommets to protect any wires routed through metal, especially the firewall.

9.ALWAYS protect the battery and electrical system from damage with proper fusing. Install a fuseholder and appro- priate fuse on the +12V power wire within 18” (45.7 cm) of the battery terminal.

10.When grounding to the chassis of the vehicle, scrape all paint from the metal to ensure a good, clean ground con- nection. Grounding connections should be as short as possible and always be connected to metal that is welded to the main body, or chassis, of the vehicle.

Improper wiring connections can seriously damage the Amplifier and your vehicle. Be sure to carefully follow the connection instructions in this manual.

Note: If you are unsure of the connections, contact your dealer.

- 4 -

S1.600D, S1.1000D specifications

The Lightning Audio S1.1000D and S1.600D are two powerful subwoofer amplifiers designed to deliver superior sound quality and performance for car audio enthusiasts. These models are part of Lightning Audio's commitment to providing high-quality audio solutions that cater to a range of listening preferences and installation requirements.

The S1.1000D is a monoblock amplifier capable of delivering 1000 watts of RMS power at 1 ohm, making it an excellent choice for powering subwoofers. Its advanced Class D topology ensures efficient power usage and minimal heat generation, allowing for prolonged listening sessions without distressing the amplifier. The S1.1000D features variable low-pass filters, gain control, and a bass boost function, which enables users to customize the sound output to suit their preferences.

The S1.600D, on the other hand, provides a more compact solution while still offering a respectable 600 watts RMS power at 1 ohm. This amplifier is designed with versatility in mind, making it suitable for a variety of car audio applications, including powering multiple subwoofers or full-range speakers. The Class D design maintains a high level of efficiency, ensuring that users can enjoy their music without worrying about overheating.

Both models feature a robust build quality that can withstand the rigors of automotive environments. They incorporate a heavy-duty aluminum chassis and incorporate thermal and short circuit protection to ensure longevity and reliability. The sleek design not only provides a modern aesthetic but also facilitates heat dissipation, promoting efficient operation under challenging conditions.

In terms of connectivity, the Lightning Audio S1 amplifiers come equipped with high-level inputs, allowing for easy integration with factory audio systems. Additionally, RCA low-level inputs provide flexibility for aftermarket systems, ensuring compatibility with a wide range of audio setups.

The built-in LED indicators allow users to monitor the operational status of the amplifier at a glance, making the installation and tuning process seamless. With user-friendly controls and quality components, the S1.1000D and S1.600D amplifiers excel in delivering an immersive listening experience, making them ideal choices for anyone looking to upgrade their car audio system.