802.11g Wireless Router
Quick Installation Guide
Select the Setup Wizard to configure the router.
You will be prompted to configure the LAN Interface Configuration. Enter the required information. Click Next.
Select your case from one of the following conditions. The quick setup wizard will guide you through the installation procedure.
Static IP：
Select Static IP. Click Next.
Enter the IP address, Subnet Mask, Default Gateway and DNS provided by your ISP. Click Save.
DHCP：
Select DHCP. Click Next.
For your ISP (Internet Service provider) to check your user identification, you will need to provide your MAC address. Click Save.
PPPoE：
Select PPPoE. Click Next.
Enter the Login ID, Password（Enter the password again to confirm the password）, and Service Name. Click Save.