ADC Intelligent Patching warranty Active Hardware

1 0 / 0 8 1 0 4 8 5 4 A E   TrueNet® Intelligent Patching

TrueNet® Intelligent Patching

Active Hardware

Specifications (Excludes 6527 1 736-00)
MECHANICAL
Panel Rack Mounting:	1U 19" (IEC 60297)
Panel Dimensions:	44 mm x 483 mm x 160 mm deep
Weight:	2.0Kg (4.4lbs)
Interfaces
UP/DOWN LINKS:	Standard RS-485, Full – duplex connector shielded RJ-45 socket
	Data rate up to 115.2 Kbps
100Base TX:	RJ-45 socket, Ethernet IEEE 802.3, 100 100Base Tx/10Base T,
	100/10 Mbps industry standard for connection to local area network.
Serial:	RS-232 Connector 9-pin D-type male
	Data rate up to 115.2 Kbps
	Protocol UART, Start bit 1, Stop bit 1, Nonparity
Control Pad:	Connector RJ-45 socket, 8 pins
Patch Panel Connections:	Connectors 6 or 12 headers, 26-pin, 100mm spacing
LED Indicators (where used)
PWR:	On when scanner is powered
CPU:	Blinking to indicate master heartbeat
DOWN LINKYELLOW:	On during transmission of each of the DOWN LINK ports
DOWN LINKGREEN:	On during reception of each of the DOWN LINK ports
100Base Tx – Rx:	On during reception from local area network
100Base Tx – Tx:	On during transmission to local area network
100Base Tx LINK:	On when link is active
Environmental & Safety
Operating temperature range:	0° C - +50° C
Operating humidity range:	≤ 90% RH non-condensing
Safety:	UL 60950, EN 60950
EMC:	EN 55022, FCC part 15 Class A, EN 55024
Power:	100 – 240 VAC, 47 – 63 Hz, 30 W maximum

O r d e r i n g I n f o r m a t i o n

Description	Catalog Number*
Intelligent Patching Scanner	6527 1 730-00
Intelligent Patching Master 4 Ports	6527 1 733-00
Intelligent Patching Master Expander	6527 1 732-00
Intelligent Patching Expander	6527 1 734-00
Intelligent Patching Indicator Controller	6527 1 735-00
Intelligent Patching Control Pad	6527 1 736-00
Intelligent Patching Mini Scanner	6527 1 739-00
Intelligent Patching Network Scanner	6527 1 741-00
Intelligent Patching Rack Indicator	6527 1 737-00
Intelligent Patching Scanner Attachment Cord Copper UTP	6527 1 750-XX
Intelligent Patching Scanner Attachment Cord Fiber	6527 1 751-XX
*Replace XX with: 1.5 m = 51, 2.5 m = 52, 6 m = 06, 12 m = 12

w w w . a d c . c o m + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 1 - 8 0 0 - 3 6 6 - 3 8 9 1 2