ADC manual 8 1 0 4 9 8 2 a E OmniReach NCX-1000s

6 / 0 8 • 1 0 4 9 8 2 A E   OmniReach® NCX-1000s

OmniReach® NCX-1000s

Distribution Intercept Cross-Connect for CoolPed™ Cabinets

Distribution Intercept

The heart of the NCX-1000s is ADC’s patented Distribution Intercept (DI) cross-connect using LSA-PLUS®Series 2 IDC connectivity.

•Brown Series 2 switching blocks route POTS into the DSLAM and present the combined DSLAM output of POTS/xDSL signals.

•White Series 2 disconnect blocks provide OSP input and output terminations.

Once the DI is spliced onto either feeder or distribution outside plant cable, broadband service activation occurs with a simple 2 pair jumper between brown and white blocks and insertion of a green activation plug. Existing voice service is immediately available upon splicing the DI onto outside plant cable due to normally closed contacts on Series 2 white blocks.

The high performance LSA-PLUS Series 2 IDC blocks are far superior to standard 66- and 110-type IDC blocks. Contacts angled at 45 degrees offer a larger, stronger cross section of wire and a gas tight seal. Silver-plated contacts resist corrosion much more effectively than standard tin-plated contacts. Combined with integral clamping ribs for extraordinary grip, LSA-PLUS blocks offer exceptional electrical performance and contribute to reduced failure frequency rates in the network.

Green activation plugs in cross–connect	NCX-1000s enables centralized broadband service
distribution field provide visual indication	delivery from CoolPed cabinets.
of active xDSL customers.

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1 2