Actiontec electronic GT701C specifications ADSL2/2+, Leading Chipset Architecture, Features

Page 1

Creative Solutions for the Digital Life

he new Actiontec USB/Ethernet DSL Modem with TRouting Capabilities is really two devices rolled into one. It’sa full rate ADSL2/2+modem. And it’sa router, capable of networking up to two computers, via wired ports, and even more using a switch or hub, with a minimum amount of hassle. So, get rid of the clutter of components on your desk and replace them all with the Actiontec

USB/Ethernet DSL Modem with Routing Capabilities.

ADSL2/2+

ADSL2/2+ is the DSL standard that enhances modem performanceby triplingtheavailable bandwidth(from8 Mbps to 24 Mbps). Say goodbye to stuttering, pixilated video streams and the endless wait while downloading large files. There’smoreroom forvoicedata, as well,so youcanexperience free or low-cost Internet telephone conversations.

Leading Chipset Architecture

The DSL Modem includes TI’s TNETD7200 Broadband Communication Processorand Peripherals. The TNETD7200 is the industry’s most densely integrated system-on-a-chip ever offered to the ADSL CPE market by Texas Instruments. The TNETD7200is consideredan ADSLbridge/router solution, integrating a broadband communications processor and peripherals,ADSL physical layer,ADSLline driver, USBphysical layer,and Ethernet physical layer.

Model # GT701C

Features

Supports UPnP Plug-and-Play installation for systems with Windows Operating Systems (98, 98SE, Me, 2000 and XP)

Support One ADSL2+ WANport (RJ11)

Compliant with full-rate ANSI T1.413 Issue 2, ITU G.992.1 (G.dmt) and G.992.2(G.lite) standard

Auto-handshake for different ADSL flavors

Compliant with USB 1.1 device specification

Supports 12-Mbits/s USB data rate (Full Speed)

Bridged Ethernet over ATM, PPP over ATM, PPP over Ethernet

Precise ATM traffic shaping

IP packet routing and transparent bridge

Routing protocol supports RIP-1, RIP-2, Static Routing

Build-in NAT, DHCP server

DNS relay support

PAP/CHAP authentication, administrative passwords through Telnet

Compliant with IEEE 802.3 Ethernet standard

Supports One 10/100 Base-T Ethernet LAN port

Flow control support for Fast Ethernet

Web-based configuration setup

Default configuration backup restore

FTP firmware upgradeable

Support web download

Image 1
Contents ADSL2/2+ FeaturesLeading Chipset Architecture Technical Specifications Telnet PPPLCP PAPMinimum System Requirements Package ContentsCorporate Office