•If you decide to use IP address from Wireless Router, select “Obtain an IP address automatically”.
•If you decide to use the IP address you are desired, select “Use the following IP address”. Make sure enter correct addresses in “IP Address” and “Subnet Mask” fields.
•You must set Wireless Router’s IP address as “Default Gateway”.
•If the DNS Server fields are empty, select “Use the following DNS server addresses” and enter the DNS address is provided by your ISP, then click “OK”.
2.2Setting up Internet Access
This section describes how to setup Wireless Router Internet access through DSL or cable modem.
For Windows 9x/2000
a)Click “Start” and select “Settings Æ Control Panel Æ Internet Options”.
b)Select “Connection” tab then click “Setup” button.
c)Select “I want to set up my Internet connection manually, or I want to connect through a local area network (LAN)” then click “Next”.
17