| The purpose of this configuration guide is to assist you in ordering the correct system |
| configuration for your application. |
| The Agilent E6474A wireless network optimization platform is used to obtain RF coverage |
| measurements and service performance measurements for wireless communications |
| networks. The Windows® based software runs on a PC that interfaces with an Agilent |
| digital RF receiver and with cdmaOne, cdma2000, HSDPA, UMTS, GSM, GPRS, EDGE, |
| and iDEN phones. The system can be configured to include receivers and phones from |
| one or a combination of technologies simultaneously. The system can control up to four |
| phones. |
Recommended minimum |
|
PC specifications: | The Agilent E6474A system requires a PC. The PC requirements differ depending on the |
| hardware configuration and on which parameters are being selected. |
| Minimum PC specifications: |
| • XP Professional SP2 (inc XP for Tablet PC) |
| • 1.6GHz Pentium M 512MB RAM |
| • Parallel port or USB Port (for software key) |
| • PCMCIA slot or a USB connection (for multiple hardware support) |
| • 30 GB hard disk space |
| • |
| • 1024 x 768 display resolution minimum |
| Recommended PC specifications: |
| • XP Professional SP2 (inc XP for Tablet PC) |
| • Intel® Core™ Duo T2500 (2GHz) 2GB RAM |
| • Parallel port or USB Port (for software key) |
| • PCMCIA slot or a USB connection (for multiple hardware support) |
| • 50 GB hard disk space |
| • |
| • 1280 x 1024 display resolution minimum |
| The Agilent network optimization drive test solution can be ordered through part numbers |
| E6473B, E6474A, W1314A, 86154A, 86156A, and E5643A. These part numbers are |
| described in this document. |
Configuration Process | Before using this configuration guide, the following decisions need to be made: |
| • Which technologies are required? |
| • Which software measurements are required? |
| • Which phones and receivers are required? |
| • Which accessories are required? |
2