ADTRAN 3000 Series manual Activate the Application Image

Page 3

NetVanta 3000 Series Routers

DLP-002

 

 

sessions.) You can cancel the update at any time using the terminal emulation software (refer to the terminal emulation software documentation for more details).

Activate the Application Image

1.Enter boot system flash <filename> to select the application image used at power-up.

2.Power cycle the unit or enter reload to complete the upgrade process. The new application image will be activated upon power-up.

Power cycling the unit is service affecting.

© 2002 ADTRAN, Inc.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Prerequisite Procedures IntroductionTools and Materials Required Backup Current Configuration to Flash Upload the Application Image Using XmodemTo Begin Activate the Application Image DLP-002 NetVanta 3000 Series Routers
Top Page Image Contents