E5805A USB/RS232 Interface
Understanding the E5805A and USB Hubs
Hubs, critical components in the USB architecture, are wiring concentrators that enable the attachment of multiple devices, thus converting a single attachment point into multiple attachment points. USB architecture allows a cascaded multiple hub configuration with certain power limitations (explained later in this section). See Figure 1.
Figure 1 Hub Architecture
Each hub has an upstream port, connecting to the host, and multiple downstream ports, connecting to downstream devices, possibly including other hubs. A hub can detect attachment and detachment of downstream devices and enable and monitor the distribution of the power to downstream devices via their integral hardware and the operating system.
Each USB device reports its power requirements to the operating system, which then enables and disables the device as a function of its power requirements and the amount of available power. High powered devices typically need to be connected to a self- powered hub that obtains power from its external power supply and provides up to 500 mA for each downstream port. Only low powered devices, such as a mouse,
14 | E5805A USB/RS232 Interface |