Agilent Technologies 1100 Series Safety Precautions, Contacting Us, To contact Technical Support

Page 6

Preface

Note Highlights information of general interest.

Tip Helpful information that can make a task easier.

Safety Precautions

To connect the Agilent 1100 Series LC stack to a Thermo Scientific mass spectrometer, you must install an external contact board in one of the Agilent modules and a LAN interface board in a second Agilent module. To install a board, you must remove the cover from the optional board slot. Figure 2 on page 6 shows the location of the slot on the back panel of the detector.

Before you remove the slot cover from an Agilent 1100 Series module, do the following:

• Turn the power switch to the Off position and unplug the power cable.

CAUTION To avoid an electric shock, always turn off an Agilent module and unplug it from line power before you remove its cover.

•Refer to the Reference Manual for the module for additional safety information and for information on preventing ESD damage caused by an electrical discharge.

CAUTION To prevent damage to an instrument, always use ESD protection when handling electronic boards and components.

Contacting Us

There are several ways to contact Thermo Fisher Scientific.

YTo contact Technical Support

Phone

800-685-9535

Fax

561-688-8736

E-mail

TechSupport.C+MS@thermofisher.com

Knowledge base

www.thermokb.com

Find software updates and utilities to download at www.mssupport.thermo.com.

vi

Agilent 1100 Series LC Devices Connecting the Hardware and Triggering Data Acquisition

Thermo Scientific

Page 5 Page 7
Image 6
Page 5 Page 7
Contents LC Devices Page Contents Page About This Guide Safety and Special NoticesPreface Related DocumentationSafety Precautions Contacting UsTo contact Technical Support To contact Customer Service for ordering information To suggest changes to documentation or to HelpPage Agilent Modules Supported by LC Devices Versions 2.0.2 To check the firmware version of an Agilent 1100 moduleRecords Connecting the Hardware Ethernet Communication KitInstalling a Network Card in an Agilent Module Supported serial numberTo install the network interface card in an Agilent module Detector Power switch On positionBack panel of an Agilent 1100 Series detector Connecting the Ethernet Communication Cables Ethernet Switch Cat5 shielded Ethernet cablesInstalling the External Contact Interface Board To install the external contact interface boardConnecting the Trigger Cable Connections for 2-wire, DB15 trigger cable Configuring the Autosampler for Contact Closure Agilent1100 Autosampler dialog box Triggering Data Acquisition with the Autosampler Triggering Data Acquisition with the Autosampler Turning Off the Solvent Tracking Feature Agilent 1100 handheld control moduleTurning Off the Solvent Tracking Feature To upgrade your HP 1100 Series LC Upgrading an HP 1100 Series LCPart Number Description of Part Instrument Setup view Index
Related manuals
Manual 272 pages 29.99 Kb

1100 Series specifications

Agilent Technologies 1100 Series is a highly regarded lineup of high-performance liquid chromatography (HPLC) systems designed to meet the demanding needs of laboratories in various fields including pharmaceuticals, environmental testing, and food safety. Known for its versatility, reliability, and advanced technology, the 1100 Series has established itself as a benchmark for analytical performance.

One of the standout features of the Agilent 1100 Series is its modular architecture. This design allows users to configure the system according to specific analytical requirements. The components such as pumps, detectors, and autosamplers can be mixed and matched to create a tailored solution, ensuring maximum efficiency and optimal performance. This modularity also facilitates easy upgrades and maintenance, significantly extending the life cycle of the instrument.

At the heart of the 1100 Series is its advanced pumping technology. The system utilizes precise, high-pressure pumps that ensure a consistent flow rate and excellent reproducibility, essential for accurate quantification of analytes. The binary and quaternary pump options provide flexibility in method development, enabling users to perform gradient elution with ease.

The Agilent 1100 Series also boasts a range of detectors, including UV/VIS, fluorescence, and refractive index detectors. Each detector is designed to enhance sensitivity and specificity, enabling the detection of a wide array of compounds. The UV/VIS detector, in particular, is known for its reliable performance and user-friendly interface, which simplifies method setup and data analysis.

Another critical aspect of the 1100 Series is its autosampler. The system's autosamplers provide high throughput and automatic sample handling, which significantly reduces human error and increases productivity. The intelligent design allows for temperature control and reliable sample injection, ensuring optimal results.

In terms of software, the 1100 Series is supported by Agilent’s OpenLAB software, which offers an intuitive platform for method development, data acquisition, and analysis. This software integrates seamlessly with the HPLC hardware, making it easier for scientists to manage workflows and maintain compliance with regulatory requirements.

Overall, the Agilent Technologies 1100 Series represents a significant advancement in liquid chromatography, bringing together ideal characteristics such as modularity, precision, versatility, and sophistication. Its commitment to innovation and quality makes it a preferred choice for laboratories seeking reliable analytical solutions.
Top Page Image Contents